Tag Archives: howard IT

RADIUS Single Sign On – FortiAuthenticator 4.0

RADIUS Single Sign-On

A FortiGate or FortiMail unit can transparently identify users who have already authenticated on an external RADIUS server by parsing RADIUS accounting records. However, this approach has potential difficulties:

The RADIUS server is business-critical IT infrastructure, limiting the changes that can be made to the server configuration.
In some cases, the server can send accounting records only to a single endpoint. Some network topologies may require multiple endpoints.

The FortiAuthenticator RADIUS Accounting Proxy overcomes these limitations by proxying the RADIUS accounting records, modifying them, and replicating them to the multiple subscribing endpoints as needed.

RADIUS accounting proxy

The FortiAuthenticator receives RADIUS accounting packets from a carrier RADIUS server, transforms them, and then forwards them to multiple FortiGate or FortiMail devices for use in RADIUS Single Sign-On. This differs from the packet use of RADIUS accounting (RADIUS accounting on page 115).

The accounting proxy needs to know:

l Rule sets to define or derive the RADIUS attributes that the FortiGate unit requires, l The source of the RADIUS accounting records: the RADIUS server, l The destination(s) of the accounting records: the FortiGate units using this information for RADIUS SSO authentication.

General settings

General RADIUS accounting proxy settings can be configure by going to Fortinet SSO Methods > Accounting Proxy > General.

The following settings are available:

Log level	Select Debug, Info, Warning, or Error as the minimum severity level of event to log from the drop-down list.
Group cache lifetime	Enter the amount of time after which user group memberships will expire in the cache, from 1 to 10080 minutes (7 days). The default is 480 minutes.
Number of proxy retries	Enter the number of times to retry proxy requests if they timeout, from 0 to 3 retries, where 0 disables retries. The default is 3 retries.
Proxy retry timeout	Enter the retry period (timeout) of a proxy request, from 1 to 10 seconds.
Statistics update period	Enter the time between statistics updates to the seconds debug log, from 1 to 3600 seconds (1 hour).

Select OK to apply your changes.

accounting proxy RADIUS

Rule sets

A rule set can contain multiple rules. Each rule can do one of:

l add an attribute with a fixed value l add an attribute retrieved from a user’s record on an LDAP server l rename an attribute to make it acceptable to the accounting proxy destination.

The FortiAuthenticator unit can store up to 10 rule sets. You can provide both a name and a description to each rule set to help you remember each rule set’s purpose.

Rules access RADIUS attributes of which there are both standard attributes and vendor-specific attributes (VSAs). To select a standard attribute, select the Default vendor. See RADIUS attributes on page 72.

To view the accounting proxy rule set list, go to Fortinet SSO Methods > Accounting Proxy > Rule Sets.

To add RADIUS accounting proxy rule sets:

From the rule set list, select Create New. The Create New Rule Set window opens.
Enter the following information:

Name	Enter a name to use when selecting this rule set for an accounting proxy destination.
Description	Optionally, enter a brief description of the rule’s purpose.
Rules	Enter one or more rules.

Single Sign-On RADIUS accounting proxy

Action	The action for each rule can be either Add or Modify. l Add: add either a static value or a value derived from an LDAP server. l Modify: rename an attribute.
Attribute	Select Browse and choose the appropriate Vendor and Attribute ID in the Select a RADIUS Attribute dialog box.
Attribute 2	If the action is set to Modify, a second attribute may be selected. The first attribute will be renamed to the second attribute.
Value Type	If the action is set to Add, select a value type from the drop-down list. l Static value: adds the attribute in the Attribute field containing the static value in the Value field. l Group names: adds attribute in the Attribute field containing “Group names” from the group membership of the Username Attribute on the remote LDAP server. l Services: adds attribute in the Attribute field containing “Services” from the group membership of the Username Attribute on the remote LDAP server. l UTM profile groups: adds attribute in the Attribute field containing “UTM profile groups” from the group membership of the Username Attribute on the remote LDAP server.
Value	If the action is set to Add and Value Type is set to Static value, enter the static value.
Username Attribute	If the action is set to Add, and Value Type is not set to Static value, specify an attribute that provides the user’s name, or select Browse and choose the appropriate Vendor and Attribute ID in the Select a RADIUS Attribute dialog box.
Remote LDAP	If the attribute addition requires an LDAP server, select one from the dropdown list. See LDAP on page 88 for information on remote LDAP servers.
Description	A brief description of the rule is provided.
Add another rule	Select to add another rule to the rule set.

Select OK to create the new rule set.

Example rule set

The incoming accounting packets contain the following fields:

User-Name l NAS-IP-Address l Fortinet-Client-IP-Address

The outgoing accounting packets need to have these fields:

accounting proxy RADIUS

User-Name l NAS-IP-Address l Fortinet-Client-IP-Address l Session-Timeout: Value is always 3600 l Fortinet-Group-Name: Value is obtained from user’s group membership on remote LDAP l Service-Type: Value is obtained from user’s group membership and SSO Group Mapping

The rule set needs three rules to add Session-Timeout, Fortinet-Group-Name, and Service-Type. The following image provides an example:

Sources

The RADIUS accounting proxy sources list can be viewed in Fortinet SSO Methods > Accounting Proxy > Sources. Sources can be added, edited, and deleted as needed.

To add a RADIUS accounting proxy source:

From the source list, select Create New. The Create New RADIUS Accounting Proxy Source window opens.
Enter the following information:

Name

Enter the name of the

This is used in FortiAuthenticator configurations.

RADIUS

server.

Single Sign-On RADIUS accounting proxy

Source name/IP	Enter the FQDN or IP address of the server.
Secret	Enter the shared secret required to access the server.
Description	Optionally, enter a description of the source.

Select OK to add the RADIUS accounting proxy source.

Destinations

The destination of the RADIUS accounting records is the FortiGate unit that will use the records to identify users. When defining the destination, you also specify the source of the records (a RADIUS client already defined as a source) and the rule set to apply to the records.

To view the RADIUS accounting proxy destinations list, go to Fortinet SSO Methods > Accounting Proxy > Destinations.

To add a RADIUS accounting proxy destinations:

From the destinations list, select Create New. The Create New RADIUS Accounting Proxy Destination window opens.
Enter the following information:

Name	Enter a name to identify the destination device in your configuration.
Destination name/IP	Enter The FQDN or IP address of the FortiGate that will receive the RADIUS accounting records.
Secret	Enter the preshared key of the destination.
Source	Select a RADIUS client defined as a source from the drop-down list. See Sources on page 127.
Rule set	Select an appropriate rule set from the drop-down list or select Create New to create a new rule set. See Rule sets on page 125.

Select OK to add the RADIUS accounting proxy destination.

Fortinet Single Sign On – FortiAuthenticator 4.0

Fortinet Single Sign-On

FSSO is a set of methods to transparently authenticate users to FortiGate and FortiCache devices. This means that the FortiAuthenticator unit is trusting the implicit authentication of a different system, and using that to identify the user. FortiAuthenticator takes this framework and enhances it with several authentication methods:

Users can authenticate through a web portal and a set of embeddable widgets. l Users with FortiClient Endpoint Security installed can be automatically authenticated through the FortiClient SSO Mobility Agent.
Users authenticating against Active Directory can be automatically authenticated. l RADIUS Accounting packets can be used to trigger an FSSO authentication. l Users can be identified through the FortiAuthenticator API. This is useful for integration with third party systems.

The FortiAuthenticator unit must be configured to collect the relevant user logon data. After this basic configuration is complete, the various methods of collecting the log in information can be set up as needed.

Domain controller polling

When the FortiAuthenticator runs for the first time, it will poll the domain controller (DC) logs backwards until either the end of the log file or the logon timeout setting, whichever is reached first.

When the FortiAuthenticator is rebooted, the memory cache is written to the disk, then re-read at startup, allowing the previous state to be retained. Windows DC polling restarts on boot, then searches backwards in the DC log files until it reaches either the log that matches the last known serial number found in the login cache file, the log that is older than the last recorded read time, or the end of the log file, whichever is reached first.

The currently logged in FSSO users list is cached in memory and periodically written to disk. In an active-passive HA cluster, this file is synchronized to the slave device.

Windows management instrumentation polling

The FortiAuthenticator supports Windows Management Instrumentation (WMI) polling to detect workstation log off. This validates the currently logged on user for an IP address that has been discovered by the DC polling detection method.

Remote WMI access requires that the related ports are opened in the Windows firewall, and access to a domain account that belongs to the Domain Admin group.

To open ports in the Windows firewall in Windows 7, run gpedit.msc, go to Computerconfiguration >

Administrative Templates > Network > Network Connections > Windows Firewall > Domain Profile, go to Allow remote admin exception, then enable remote admin exception and, if necessary, configure an IP subnet/range.

General settings

The FortiAuthenticator unit listens for requests from authentication clients and can poll Windows Active Directory servers.

To configure FortiAuthenticator FSSO polling:

Go to Fortinet SSO Methods > SSO > General to open the Edit SSO Configuration The Edit SSO Configuration window contains sections for FortiGate, FSSO, and user group membership.
In the FortiGate section, configure the following settings:

Listening port	Leave at 8000 unless your network requires you to change this. Ensure this port is allowed through the firewall.
Enable authentication	Select to enable authentication, then enter a secret key, or password, in the Secret key field.
Login Expiry	The length of time, in minutes, that users can remain logged in before the system logs them off automatically. The default is 480 minutes (8 hours).
Extend user session beyond logoff by	The length of time, in seconds, that a user session is extended after the user logs off, from 0 (default) to 3600 seconds.
Enable NTLM authentication	Select to enable NTLM authentication, then enter the NETBIOS or DNS name of the domain that the login user belongs to in the Userdomain field.

In the Fortinet Single Sign-On (FSSO) section, configure the following settings:

Maximum concurrent user sessions

Enter the maximum number of concurrent FSSO login sessions a user is allowed to have. Use 0 for unlimited.

Select Configure Per User/Group to configure the maximum number of concurrent sessions for each user or group. See Fine-grained controls on page 112.

Log Level

Select one of Debug, Info, Warning, or Error as the minimum severity level of events to log from the drop- down list.

Select Download all logs to download all FSSO logs to your management computer.

General settings

Enable Windows Active

Directory domain controller polling

Select to enable Windows AD polling.

Select to enable polling additional logon events, including from devices using Kerberos authentication or from Mac OS X systems, and from event IDs 672, 680, 4776, and 4768.

Enable polling additional logon events

When additional active directory logon event IDs is enabled, event IDs 528, 540, and 4624 are also polled. These event are generated when a user attempts to access a domain service or resource. When a user logs off from the workstation, such an event will be generated.

Enter the additional logon event timeout time in the Additional logon event timeout field, from 1 to 480 minutes, with 5 minutes being the default time.

Note: After a user logs off, their SSO session will stay active for the above configured period of time. During this time, if another user changes to the previous user’s IP address, they may be able to bypass the necessary authentication. For this reason, it is strongly recommended that the timeout time be kept short.

Enable DNS

lookup to get IP

from workstation name

Select to use DNS lookup to get IP address information when an event contains only the workstation name.

This option is enabled by default.

Directly use domain DNS

suffix in lookup

Select to use the domain DNS suffix when doing a DNS lookup.

This option is disabled by default.

Enable reverse DNS lookup to get workstation name from IP

Select to enable reverse DNS lookup. Reverse DNS lookup is used when an event contains only an IP address and no workstation name.

This option is enabled by default.

Do one more DNS lookup to get full list of IPs after reverse lookup of workstation name

Reverse DNS lookup is used when an event contains only an IP address and no workstation name. Once the workstation name is determined, it is used in the DNS lookup again to get more complete IP address

information. This is useful in environments where workstations have multiple network interfaces.

This option is disabled by default.

Include account name ending

with $ (usually computer account)

Accounts that end in “$” used to exclusively denote computer accounts with

no actual user, but in some cases, valid accounts imported from dated systems can feature them.

This option is disabled by default.

Enable Radius Accounting SSO clients

Select to enable the detection of users sign-ons and sign- offs from incoming RADIUS accounting (Start, Stop, and Interim-Update) records.

Use RADIUS realm as

Windows Active

Directory domain

Select to use the RADIUS realm as the Windows AD domain.

Enable Syslog SSO

Select to enable Syslog SSO.

General settings

Enable FortiClient SSO Mobility Agent Service	Select to enable single sign-on (SSO) by clients running FortiClient Endpoint Security. For more information, see FortiClient SSO Mobility Agent on page 123.
FortiClient listening port	Enter the FortiClient listening port number.
Enable authentication	Select to enable authentication, then enter a secret key, or password, in the Secret key field.
Keep-alive interval	Enter the duration between keep-alive transmissions, from 1 to 60 minutes. Default is 5 minutes.
Idle timeout	Enter an amount of time after which to logoff a user if their status is not updated. The value cannot be lower than the Keep-alive interval value.
Enable NTLM	Select to enable the NT LAN Manager (NTLM) to allow logon of users who are connected to a domain that does not have the FSSO DC Agent installed. Disable NTLM authentication only if your network does not support NTLM authentication for security or other reasons. Enter an amount of time after which NTLM authentication expires in the NTLM authentication expiry field, from 1 to 10080 minutes (7 days).
Enable hierarchical FSSO tiering	Select to enable hierarchical FSSO tiering. Enter the collector listening port in the Collectorlistening port field.
Enable DC/TS Agent Clients	Select to enable clients using DC or TS Agent. Enter the UDP port in the DC/TS Agent listening port field. Default is 8002. Select Enable authentication to enable authentication, then enter a secret key, or password, in the Secret key field.
Restrict auto- discovered domain controllers to configured domain controllers	Select to enable restricting automatically discovered domain controllers to already configured domain controllers only. See Domain controllers on page 114.
Enable Windows Active Directory workstation IP verification	Select to enable workstation IP verification with Windows Active Directory. If enabled, select Enable IP change detection via DNS lookup to detect IP changes via DNS lookup.

In the UserGroup Membership section, configure the following settings:

General settings

Group cache mode	Select the group cache mode: l Passive: Items have an expiry time after which the are removed and re-queried on the next logon. l Active: Items are periodically updated for all currently logged on users.
Group cache item lifetime	Enter the amount of time after which items will expire (default = 480 minutes). This is only available when the group cache mode is set to Passive.
Do not use cached groups…	Select to prevent using cached groups and to always load groups from server for the following SSO sources: l Windows Active Directory domain controller polling l RADIUS Accounting SSO l Syslog SSO l FortiClient SSO Mobility Agent l DC Agent l TS Agent l User login portal l SSO web service
Base distinguished names to search…	Enter the base distinguished names to search for nesting of users or groups into cross domain and domain local groups.

Select OK to apply the settings.

Pages: 1 2 3 4 5

Port Based Network Access Control – FortiAuthenticator 4.0

1 Reply

Port-based Network Access Control

Port-based Network Access Control (PNAC), or 802.1X, authentication requires a client, an authenticator, and an authentication server (such as a FortiAuthenticator device).

The client is a device that wants to connect to the network. The authenticator is simply a network device, such as a wireless access point or switch. The authentication server is usually a host that supports the RADIUS and EAP protocols.

The client is not allowed access to the network until the client’s identity has been validated and authorized. Using 802.1X authentication, the client provides credentials to the authenticator, which the authenticator forwards to the authentication server for verification. If the authentication server determines that the credentials are valid, the client device is allowed access to the network.

FortiAuthenticator supports several IEEE 802.1X EAP methods.

EAP

The FortiAuthenticator unit supports several IEEE 802.1X EAP methods. These include authentication methods most commonly used in WiFi networks.

EAP is defined in RFC 3748 and updated in RFC 5247. EAP does not include security for the conversation between the client and the authentication server, so it is usually used within a secure tunnel technology such as TLS, TTLS, or MS-CHAP.

The FortiAuthenticator unit supports the following EAP methods:

Method	Server Auth	Client Auth	Encryption	Native OS Support
PEAP (MSCHAPv2)	Yes	Yes	Yes	Windows XP, Vista, 7
EAP-TTLS	Yes	No	Yes	Windows Vista, 7
EAP-TLS	Yes	Yes	Yes	Windows (XP, 7), Mac OS X, iOS, Linux, Android
EAP-GTC	Yes	Yes	Yes	None (external supplicant required)

In addition to providing a channel for user authentication, EAP methods also provide certificate-based authentication of the server computer. EAP-TLS provides mutual authentication: the client and server authenticate each other using certificates. This is essential for authentication onto an enterprise network in a BYOD environment.

For successful EAP-TLS authentication, the user’s certificate must be bound to their account in Authentication >

UserManagement > Local Users (see Local users on page 58) and the relevant RADIUS client in Authentication > RADIUS Service > Clients (see RADIUS service on page 91) must permit that user to authenticate. By default, all local users can authenticate, but it is possible to limit authentication to specified user groups.

Port-based Network Access Control EAP

The FortiAuthenticator unit and EAP

A FortiAuthenticator unit delivers all of the authentication features required for a successful EAP-TLS deployment, including:

Certificate Management: create and revoke certificates as a CA. See Certificate Management on page 132.
Simple Certificate Enrollment Protocol (SCEP) Server: exchange a Certificate Signing Request (CSR) and the resulting signed certificate, simplifying the process of obtaining a device certificate.

FortiAuthenticator unit configuration

To configure the FortiAuthenticator unit, you need to:

Create a CA certificate for the FortiAuthenticator unit. See Certificate authorities on page 140.

Optionally, you can skip this step and use an external CA certificate instead. Go to Certificate Management > Certificate Authorities > Trusted CAs to import CA certificates. See Trusted CAs on page 147.

Create a server certificate for the FortiAuthenticator unit, using the CA certificate you created or imported in the preceding step. See End entities on page 133.
If you configure EAP-TTLS authentication, go to Authentication > RADIUS Service > EAP and configure the certificates for EAP. See Configuring certificates for EAP on page 102.
If SCEP will be used:
1. Configure an SMTP server to be used for sending SCEP notifications. Then configure the email service for the administrator to use the SMTP server that you created. See E-mail services on page 46.
2. Go to Certificate Management > SCEP > General and select Enable SCEP. Then select the CA certificate that you created or imported in Step 1 in the Default CA field and select OK. See SCEP on page 147.
Go to Authentication > Remote Auth. Servers > LDAP and add the remote LDAP server that contains your user database. See LDAP on page 88.
Import users from the remote LDAP server. You can choose which specific users will be permitted to authenticate. See Remote users on page 65.
Go to Authentication > RADIUS Service > Clients to add the FortiGate wireless controller as an authentication client. Be sure to select the type of EAP authentication you intend to use. See RADIUS service on page 91.

Configuring certificates for EAP

The FortiAuthenticator unit can authenticate itself to clients with a CA certificate.

Go to Certificate Management > Certificate Authorities > Trusted CAs to import the certificate you will use. See Trusted CAs on page 147.
Go to Authentication > RADIUS Service > EAP.
Select the EAP server certificate from the EAP ServerCertificate drop-down list.
Select the trusted CAs and local CAs to use for EAP authentication from their requisite lists.
Select OK to apply the settings.

Configuring switches and wireless controllers to use 802.1X authentication

The 802.1X configuration will be largely vendor dependent. The key requirements are:

Device self-enrollment Port-based Network Access Control

l RADIUS Server IP: This is the IP address of the FortiAuthenticator l Key: The preshared secret configured in the FortiAuthenticator authentication client settings l Authentication Port: By default, FortiAuthenticator listens for authentication requests on port 1812.

Device self-enrollment

Device certificate self-enrollment is a method for local and remote users to obtain certificates for their devices. It is primarily used in enabling EAP-TLS for BYOD. For example:

l A user brings their tablet to a BYOD organization. l They log in to the FortiAuthenticator unit and create a certificate for the device. l With their certificate, username, and password they can authenticate to gain access to the wireless network. l Without the certificate, they are unable to access the network.

To enable device self-enrollment and adjust self-enrollment settings, go to Authentication > Self-service Portal > Device Self-enrollment and select Enable userdevice certificate self-enrollment.

SCEP enrollment template	Select a SCEP enrollment template from the drop-down list. SCEP can be configured in Certificate Management > SCEP. See SCEP on page 147 for more information.
Max. devices	Set the maximum number of devices that a user can self-enroll.
Key size	Select the key size for self-enrolled certificates (1024, 2048, or 4096 bits). iOS devices only support two key size: 1024 and 2048.
Enable self-enrollment for Smart Card certificate	Select to enable self-enrollment for smart card certificates. This requires that a DNS domain name be configured, as it is used in the CRL Distribution Points (CDPs) certificate extension.

Port-based Network Access Control Non-compliant devices

Select OK to apply any changes you have made.

Non-compliant devices

802.1X methods require interactive entry of user credentials to prove a user’s identity before allowing them access to the network. This is not possible for non-interactive devices, such as printers. MAC Authentication Bypass is supported to allow non-802.1X compliant devices to be identified and accepted onto the network using their MAC address as authentication.

This feature is only for 802.1X MAC Authentication Bypass. FortiGate Captive Portal MAC Authentication is supported by configuring the MAC address as a standard user, with the MAC address as both the username and password, and not by entering it in the MAC Devices section.

Multiple MAC devices can be imported in bulk from a CSV file. The first column of the CSV file contains the device names (maximum of 50 characters), and the second column contains the corresponding MAC addresses (0123456789AB or 01:23:45:67:89:AB).

To configure MAC-based authentication for a device:

Go to Authentication > User Management > MAC Devices. The MAC device list will be shown.
If you are adding a new device, select Create New to open the Create New MAC-based Authentication Device

If you are editing an already existing device, select the device from the device list.

Enter the device name in the Name field, and enter the device’s MAC address in the MAC address
Select OK to apply your changes.

To import MAC devices:

In the MAC device list, select Import.
Select Browse to locate the CSV file on your computer.
Select OK to import the list.

The import will fail if the maximum number of MAC devices has already been reached, or if any of the information contained within the file does not conform, for example if the device name too long, or there is an incorrectly formatted MAC address.

FortiAuthenticator 4.0 Authentication

2 Replies

Authentication

FortiAuthenticator provides an easy to configure authentication server for your users. Multiple FortiGate units can use a single FortiAuthenticator unit for remote authentication and FortiToken device management.

FortiAuthenticatorin a multiple FortiGate unit network

This chapter includes the following topics:

l What to configure l User account policies l User management l FortiToken devices and mobile apps l Self-service portal l Remote authentication servers l RADIUS service l LDAP service l FortiAuthenticator Agents

What to configure

You need to decide which elements of FortiAuthenticator configuration you need.

Determine the type of authentication you will use: password-based or token-based. Optionally, you can enable both types. This is called two-factor authentication.

What to configure

Determine the type of authentication server you will use: RADIUS, built-in LDAP, or Remote LDAP. You will need to use at least one of these server types.
Determine which FortiGate units or third party devices will use the FortiAuthenticator unit. The FortiAuthenticator unit must be configured on each FortiGate unit as an authentication server, either RADIUS or LDAP. For RADIUS authentication, each FortiGate unit or third party device must be configured on the FortiAuthenticator unit as an authentication client.

Password-based authentication

User accounts can be created on the FortiAuthenticator device in multiple ways:

l Administrator creates a user and specifies their username and password. l Administrator creates a username and a random password is automatically emailed to the user. l Users are created by importing either a CSV file or from an external LDAP server.

Users can self-register for password-based authentication. This reduces the workload for the system administrator. Users can choose their own passwords or have a randomly generated password provided in the browser or sent to them via email or SMS. Self-registration can be instant, or it can require administrator approval. See Self-registration on page 76.

Once created, users are automatically part of the RADIUS Authentication system and can be authenticated remotely.

See User management on page 57 for more information about user accounts.

Two-factor authentication

Two-factor authentication increases security by requiring multiple pieces of information on top of the username and password. There are generally two factors:

something the user knows, usually a password, l something the user has, such as a FortiToken device.

Requiring the two factors increases the difficulty for an unauthorized person to impersonate a legitimate user.

To enable two-factor authentication, configure both password-based and token-based authentication in the user’s account.

FortiAuthenticator token-based authentication requires the user to enter a numeric token at login. Two types of numerical tokens are supported:

Time based: TOTP (RFC 6238)

The token passcode is generated using a combination of the time and a secret key which is known only by the token and the FortiAuthenticator device. The token password changes at regular time intervals, and the FortiAuthenticator unit is able to validate the entered passcode using the time and the secret seed information for that token.

Passcodes can only be used a single time (one time passcodes) to prevent replay attacks. Fortinet has the following time based tokens:

FortiToken 200 l FortiToken Mobile, running on a compatible smartphone l Event based: HMAC-based One Time Password (HTOP) (RFC 4226) What to configure

The token passcode is generated using an event trigger and a secret key. Event tokens are supported using a valid email account and a mobile phone number with SMS service.

FortiToken devices, FortiToken Mobile apps, email addresses, and phone numbers must be configured in the user’s account.

Only the administrator can configure token-based authentication. See Configuring token based authentication on page 62.

Authentication servers

The FortiAuthenticator unit has built-in RADIUS and LDAP servers. It also supports the use of remote RADIUS and LDAP (which can include Windows AD servers).

The built-in servers are best used where there is no existing authentication infrastructure, or when a separate set of credentials is required. You build a user account database on the FortiAuthenticator unit. The database can include additional user information such as street addresses and phone numbers that cannot be stored in a FortiGate unit’s user authentication database. To authenticate, either LDAP or RADIUS can be used. The remote LDAP option adds your FortiGate units to an existing LDAP structure. Optionally, you can add two-factor authentication to remote LDAP.

RADIUS

If you use RADIUS, you must enable RADIUS in each user account. FortiGate units must be registered as RADIUS authentication clients in Authentication > RADIUS Service > Clients. See RADIUS service on page 91. On each FortiGate unit that will use the RADIUS protocol, the FortiAuthenticator unit must be configured as a RADIUS server in User & Device > Authentication > RADIUS Server.

Built-in LDAP

If you use built-in LDAP, you will need to configure the LDAP directory tree. You add users from the user database to the appropriate nodes in the LDAP hierarchy. See Creating the directory tree on page 96. On each FortiGate unit that will use LDAP protocol, the FortiAuthenticator unit must be configured as an LDAP server in User & Device > Authentication > LDAP Server.

Remote LDAP

Remote LDAP is used when an existing LDAP directory exists and should be used for authentication. User information can be selectively synchronised with the FortiAuthenticator unit, but the user credentials (passwords) remain on, and are validated against the LDAP directory.

To utilize remote LDAP, the authentication client (such as a FortiGate device) must connect to the

FortiAuthenticator device using RADIUS to authenticate the user information (see

User & Device > Authentication > RADIUS Server). The password is then proxied to the LDAP server for validation, while any associated token passcode is validated locally.

Machine authentication

Machine, or computer, authentication is a feature of the Windows supplicant that allows a Windows machine to authenticate to a network via 802.1X prior to user authentication.

Machine authentication is performed by the computer itself, which sends its computer object credentials before the Windows logon screen appears. User authentication is performed after the user logs in to Windows.

User account policies

Based on the computer credentials provided during machine authentication, limited access to the network can be granted. For example, access can be granted to just the Active Directory server to enable user authentication.

Following machine authentication, user authentication can take place to authenticate that the user is also valid, and to then grant further access to the network.

Machine authentication commonly occurs on boot up or log out, and not, for example, when a device awakens from hibernation. Because of this, the FortiAuthenticator caches authenticated devices based on their MAC addresses for a configurable period (see General on page 54). For more information on cached users, see Windows device logins on page 131

To configure machine authentication, see Clients on page 92.

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13

FortiAuthenticator 4.0 System

5 Replies

System

The System tab enables you to manage and configure the basic system options for the FortiAuthenticator unit. This includes the basic network settings to connect the device to the corporate network, the configuration of administrators and their access privileges, managing and updating firmware for the device, and managing messaging servers and services.

The System tab provides access to the following menus and sub-menus:

Dashboard	Select this menu to monitor, and troubleshoot your FortiAuthenticator device. Dashboard widgets include: l System Information widget l System Resources widget l Authentication Activity widget l User Inventory widget l HA Status l License Information widget l Disk Monitor l Top User Lockouts widget
Network	Select this menu to configure your FortiAuthenticator interfaces and network settings. l Interfaces l DNS l Static routing l Packet capture
Administration	Select this menu to configure administrative settings for the FortiAuthenticator device. l GUI access l High availability l Firmware l Automatic backup l SNMP l Licensing l FortiGuard l FTP servers l Administration
Messaging	Select this menu to configure messaging servers and services for the FortiAuthenticator device. l SMTP servers l E-mail services l SMS gateways

Dashboard

When you select the System tab, it automatically opens at the System > Dashboard page.

The Dashboard page displays widgets that provide performance and status information and enable you to configure some basic system settings. These widgets appear on a single dashboard.

The following widgets are available:

System Information	Displays basic information about the FortiAuthenticator system including host name, DNS domain name, serial number, system time, firmware version, architecture, system configuration, current administrator, and up time. From this widget you can manually update the FortiAuthenticator firmware to a different release. For more information, see System Information widget on page 25.
System Resources	Displays the usage status of the CPU and memory. For more information, see System Resources widget on page 29.
Authentication Activity	Displays a customizable graph of the number of logins to the device. For more information, see Authentication Activity widget on page 29.
User Inventory	Displays the numbers of users, groups, FortiTokens, FSSO users, and FortiClient users currently used or logged in, as well as the maximum allowed number, the number still available, and the number that are disabled. For more information, see User Inventory widget on page 29.
HA Status	Displays whether or not HA is enabled.
License Information	Displays the device’s license information, as well as SMS information. For more information, see License Information widget on page 29.
Disk Monitor	Displays if RAID is enabled, and the current disk usage in GB.
Top User Lockouts	Displays the top user lockouts. For more information, see Top User Lockouts widget on page 30.

Customizing the dashboard

The FortiAuthenticator system settings dashboard is customizable. You can select which widgets to display, where they are located on the page, and whether they are minimized or maximized.

To move a widget

Position your mouse cursor on the widget’s title bar, then click and drag the widget to its new location.

To add a widget

In the dashboard toolbar, select Add Widget, then select the name of widget that you want to show. Multiple widgets of the same type can be added. To hide a widget, in its title bar, select the Close icon.

To see the available options for a widget

Position your mouse cursor over the icons in the widget’s title bar. Options include show/hide the widget, edit the widget, refresh the widget content, and close the widget.

The following table lists the widget options.

Show/Hide arrow	Display or minimize the widget.
Widget Title	The name of the widget.
Edit	Select to change settings for the widget. This option appears only in certain widgets.
Refresh	Select to update the displayed information.
Close	Select to remove the widget from the dashboard. You will be prompted to confirm the action. To add the widget, select Widget in the toolbar and then select the name of the widget you want to show.

To change the widget title

Widget titles can be customized by selecting the edit button in the title bar and entering a new title in the widget settings dialog box. Some widgets have more options in their respective settings dialog box.

To reset a widget title to its default name, simply leave the Custom widget title field blank.

The widget refresh interval can also be manually adjusted from this dialog box.

System Information widget

The system dashboard includes a System Information widget, which displays the current status of the FortiAuthenticator unit and enables you to configure basic system settings.

The following information is available on this widget:

Host Name	The identifying name assigned to this FortiAuthenticator unit. For more information, see Changing the host name on page 26.
DNS Domain Name	The DNS domain name. For more information, see Changing the DNS domain name on page 27.
Serial Number	The serial number of the FortiAuthenticator unit. The serial number is unique to the FortiAuthenticator unit and does not change with firmware upgrades. The serial number is used for identification when connecting to the FortiGuard server.
System Time	The current date, time, and time zone on the FortiAuthenticator internal clock or NTP server. For more information, see Configuring the system time, time zone, and date on page 27.
Firmware Version	The version number and build number of the firmware installed on the FortiAuthenticator unit. To update the firmware, you must download the latest version from the Customer Service & Support portal at https://support.fortinet.com. Select Update and select the firmware image to load from your management computer.
Architecture	The architecture of the device, such as 32-bit.
System Configuration	The date of the last system configuration backup. Select Backup/Restore to backup or restore the system configuration. For more information, see Backing up and restoring the configuration on page 28.
Current Administrator	The name of the currently logged on administrator.
Uptime	The duration of time the FortiAuthenticator unit has been running since it was last started or restarted.
Shutdown/Reboot	Options to shutdown or reboot the device. When rebooting or shutting down the system, you have the option to enter a message that will be added to the event log explaining the reason for the shutdown or reboot.

Changing the host name

The System Information widget will display the full host name.

To change the host name:

Go to System > Dashboard.
In the System Information widget, in the Host Name field, select Change. The Edit Host Name page opens.
In the Host name field, type a new host name.

The host name may be up to 35 characters in length. It may include US-ASCII letters, numbers, hyphens, and underscores. Spaces and special characters are not allowed.

Select OK to save the setting.

Pages: 1 2 3 4 5 6 7

FortiAuthenticator 4.0 Setup

Setup

For information about installing the FortiAuthenticator unit and accessing the CLI or GUI, refer to the Quick Start Guide provided with your unit.

This chapter provides basic setup information for getting started with your FortiAuthenticator device. For more detailed information about specific system options, see System on page 23.

The following topics are included in this section:

Initial setup l Adding a FortiAuthenticator unit to your network l Maintenance l CLI commands
Troubleshooting

Initial setup

The following section provides information about setting up the Virtual Machine (VM) version of the product.

FortiAuthenticator VM setup

Before using FortiAuthenticator-VM, you need to install the VMware application to host the FortiAuthenticator-VM device. The installation instructions for FortiAuthenticator-VM assume you are familiar with VMware products and terminology.

System requirements

For information on the FortiAuthenticator-VM system requirements, please see the product datasheet available at http://www.fortinet.com/products/fortiauthenticator.

FortiAuthenticator-VM has kernel support for more than 4GB of RAM in VM images. However, this support also depends on the VM player version. For more information, see: http://kb.vmware.com/selfservice/microsites/search.do?language=en_

US&cmd=displayKC&externalId=1014006

The default Hardware Version is 4 to support the widest base of VM players. However you can modify the VM Hardware Version by editing the following line in the FortiAuthenticator-VM.vmx file:

virtualHW.version = “4”

FortiAuthenticator-VM image installation and initial setup

The following procedure describes setup on VMware Fusion.

Initial setup

To set up the FortiAuthenticator VM image:

Download the VM image ZIP file to the local computer where VMware is installed.
Extract the files from the zip file into a folder.
In your VMware software, go to File > Open.
Navigate to the expanded VM image folder, select the FortiAuthenticator-VM.vmx file, and select Open. VMware will install and start FortiAuthenticator-VM. This process can take a minute or two to complete.
At the FortiAuthenticator login prompt, enter admin and press Enter.
At the password prompt, press Enter. By default, there is no password.
At the CLI prompt enter the following commands:

set port1-ip 192.168.1.99/24 set default-gw 192.168.1.2

Substitute your own desired FortiAuthenticator IP address and default gateway.

You can now connect to the GUI at the IP address you set for port 1.

Suspending the FortiAuthenticator-VM can have unintended consequences. Fortinet recommends that you do not use the suspend feature of VMware. Instead, shut down the virtual FortiAuthenticator system using the GUI or CLI, and then shut down the virtual machine using the VMware console.

Administrative access

Administrative access is enabled by default on port 1. Using the GUI, you can enable administrative access on other ports if necessary.

To add administrative access to an interface:

Go to System > Network > Interfaces and select the interface you need to add administrative access to. See Interfaces on page 30.
In Admin access, select the types of access to allow.
Select OK.

GUI access

To use the GUI, point your browser to the IP address of port 1 (192.168.1.99 by default). For example, enter the following in the URL box:

https://192.168.1.99

Enter admin as the UserName and leave the Password field blank.

HTTP access is not enabled by default. To enable access, use the set ha-mgmtaccess command in the CLI (see CLI commands on page 19), or enable HTTP access on the interface in the GUI (see Interfaces on page 30).

For security reasons, the host or domain names that the GUI responds to are restricted. The list of trusted hosts is automatically generated from the following:

Adding a FortiAuthenticator unit to your network

l Configured hostname l Configured DNS domain name l Network interface IP addresses that have HTTP or HTTPS enabled l HA management IP addresses

Additional IP addresses and host or domain names that the GUI responded to can be defined in the GUI Access settings. See GUI access on page 34

Telnet

CLI access is available using telnet to the port1 interface IP address (192.168.1.99 by default). Use the telnet -K option so that telnet does not attempt to log on using your user ID. For example:

$ telnet -K 192.168.1.99

At the FortiAuthenticator login prompt, enter admin. When prompted for password press Enter. By default there is no password. When you are finished, use the exit command to end the telnet session.

CLI access using Telnet is not enabled by default. To enable access, use the set ha-mgmt-access command in the CLI (see CLI commands on page 19), or enable Telnet access on the interface in the GUI (see Interfaces on page 30)

SSH

SSH provides secure access to the CLI. Connect to the port1 interface IP address (192.168.1.99 by default). Specify the user name admin or SSH will attempt to log on with your user name. For example:

$ ssh admin@192.168.1.99

At the password prompt press Enter. By default there is no password. When you are finished, use the exit command to end the session.

Pages: 1 2 3

Reports

1 Reply

Reports

FortiAnalyzer units can analyze information collected from the log files of managed log devices. It then presents the information in tabular and graphical reports that provide a quick and detailed analysis of activity on your networks.

To reduce the number of reports needed, reports are independent from devices, and contain layout information in the form of a report template. The devices, and any other required information, can be added as parameters to the report at the time of report generation.

The Reports tab allows you to configure reports using the predefined report templates, configure report schedules, view report history and the report calendar, and configure and view charts, macros, datasets, and output profiles.

If ADOMs are enabled, each ADOM will have its own report settings including chart library, macro library, dataset library, and output profiles.

FortiCache, FortiMail and FortiWeb reports are available when ADOMs are enabled. Reports for these devices are configured within their respective default ADOM. These devices also have device specific charts and datasets.

This chapter contains the following sections:

Reports
Report layouts
Chart library
Macro library
Report calendar
Advanced

Reports

FortiAnalyzer includes preconfigured reports and report templates for FortiGate, FortiMail, and FortiWeb log devices. These report templates can be used as is, or you can clone and edit the templates. You can also create new reports and report templates that can be customized to your requirements. For a list of preconfigured reports see “Report Templates” on page 207.

Predefined report templates are identified by a blue report icon, , and custom report templates are identified by a green report icon, . When a schedule has been enabled, the schedule icon, , will appear to the left of the report template name.

In the Reports tab, go to Reports > [report] to view and configure the report configuration, advanced settings, and layout, and to view completed reports. The currently running reports and completed reports are shown in the View Report tab, see “View report tab” on page 173.

Figure 118:Report page

Right-clicking on a template in the tree menu opens a pop-up menu with the following options:

Report

Create New

Create a new report. See “To create a new report:” on page 167.

Custom report templates are identified by the custom report icon, , beside the report name. Predefined report templates are identified by the predefined report icon, .

Rename Rename a report.

Clone	Clone the selected report. See “To clone a report:” on page 167.
Delete	Delete the report. The default reports cannot be deleted. See “To delete a report:” on page 167.
Import	Import a report. See “Import and export” on page 167.

Export Export a report. See “Import and export” on page 167.

Folder
Create New	Create a new report folder. See “To create a new report folder:” on page 168.

Rename Rename a report folder. See “To rename a report folder:” on page 168.

Delete Delete a report folder. Any report templates in the folder will be deleted. See “To delete a report folder:” on page 168.

Reports and report templates can be created, edited, cloned, and deleted. You can also import and export report templates. New content can be added to and organized on a template, including: new sections, three levels of headings, text boxes, images, charts, and line and page breaks.

To create a new report:

In the Reports tab, right-click on Reports in the tree menu.
Under the Report heading, select Create New.

The Create New Report dialog box opens.

Enter a name for the new report and select OK.
Configure report settings in the Configuration tab. The configuration tab includes time period, device selection, report type, schedule, and notifications.
Select the Report layouts to configure the report template.
Select the Advanced settings tab to configure report filters and other advanced settings.
Select Apply to save the report template.

To clone a report:

Right-click on the report you would like to clone in the tree menu and select Clone.

The Clone Report Template dialog box opens.

Enter a name for the new template, then select OK.

A new template with the same information as the original template is created with the given name. You can then modify the cloned report as required.

To delete a report:

Right-click on the report template that you would like to delete in the tree menu, and select Delete under the Report
In the confirmation dialog box, select OK to delete the report template.

Import and export

Report templates can be imported from and exported to the management computer.

To import a report template:

Right-click on Reports, and select Import.

The Import Report Template dialog box opens.

Select Browse, locate the report template (.dat) file on your management computer, and select OK.

The report template will be loaded into the FortiAnalyzer unit.

To export a report template:

Right-click on the report you would like to export in the tree menu and select Export.
If a dialog box opens, select to save the file (.dat) to your management computer, and select OK.

The report template can now be imported to another FortiAnalyzer device.

Report folders

Report folders can be used to help organize your reports.

To create a new report folder:

In the Reports tab, right-click on Reports in the tree menu.
Under the Folder heading, select Create New.
In the Create New Folder dialog box, enter a name for the folder, and select OK.

A new folder is created with the given name.

To rename a report folder:

Right-click on the report folder that you need to rename in the tree menu.
Under the Folder heading, select Rename.
In the Rename Folder dialog box, enter a new name for the folder, and select OK.

To delete a report folder:

Right-click on the report folder that you would like to delete in the tree menu, and select Delete under the Folder
In the confirmation dialog box, select OK to delete the report folder.

Configuration tab

In FortiAnalyzer v5.2.0 and later, the Reports tab layout has changed. When creating a new report, the Configuration tab is the first tab that is displayed. In this tab you can configure the time period, select devices, enable schedules, and enable notification.

Report schedules provide a way to schedule an hourly, daily, weekly, or monthly report so that the report will be generated at a specific time. You can also manually run a report schedule at any time, and enable or disable report schedules. Report schedules can also be edited and disabled from the Report Calendar. See “Report calendar” on page 198 for more information.

Figure 119:Configuration tab

The following settings are available in the Configuration tab:

Time Period	The time period that the report will cover. Select a time period, or select Other to manually specify the start and end date and time.
Devices	The devices that the report will include. Select either All Devices or Specify to add specific devices. Select the add icon, , to select devices.
User or IP	Enter the user name or the IP address of the user on whom the report will be based. This field is only available for the three predefined report templates in the Detailed User Report folder.
Type	Select either Single Report (Group Report) or Multiple Reports (Per-Device). This option is only available if multiple devices are selected.
Enable Schedule	Select to enable report template schedules.
Generate PDF Report Every	Select when the report is generated. Enter a number for the frequency of the report based on the time period selected from the drop-down list.
Starts On	Enter a starting date and time for the file generation.
Ends	Enter an ending date and time for the file generation, or set it for never ending.
Enable Notification	Select to enable report notification.
Output Profile	Select the output profile from the drop-down list, or select Create New, , to create a new output profile. See “Output profile” on page 203.

Pages: 1 2 3 4 5 6 7 8 9

Logs, Reports, and Alerts

4 Replies

Logs, reports and alerts

The Log and Report menu lets you configure logging, reports, and alert email.

FortiMail units provide extensive logging capabilities for virus incidents, spam incidents and system events. Detailed log information and reports provide analysis of network activity to help you identify security issues and reduce network misuse and abuse.

Logs are useful when diagnosing problems or when you want to track actions the FortiMail unit performs as it receives and processes traffic.

This section includes:

About FortiMail logging
Configuring logging
Configuring report profiles and generating reports
Configuring alert email
Viewing log messages
Viewing generated reports

About FortiMail logging

FortiMail units can log many different email activities and traffic including:

system-related events, such as system restarts and HA activity
virus detections
spam filtering results
POP3, SMTP, IMAP and webmail events

You can select which severity level an activity or event must meet in order to be recorded in the logs. For more information, see “Log message severity levels” on page 668.

A FortiMail unit can save log messages to its hard disk or a remote location, such as a Syslog server or a Fortinet FortiAnalyzer unit. For more information, see “Configuring logging” on page 671. It can also use log messages as the basis for reports. For more information, see “Configuring report profiles and generating reports” on page 676.

Accessing FortiMail log messages

There are several ways you can access FortiMail log messages:

On the FortiMail web UI, you can view log messages by going to Monitor > Log. For details, see the FortiMail Administration Guide.
On the FortiMail web UI, under Monitor > Log, you can download log messages to your local PC and view them later.
You can send log messages to a FortiAnalyzer unit by going to Log and Report > Log Settings > Remote Log Settings and view them on FortiAnalyzer.
You can send log messages to any Syslog server by going to Log and Report > Log Settings > Remote Log Settings.

Pages: 1 2 3 4 5 6 7 8