ISC BIND DNS Configuration

What is Discovered and Monitored

Protocol	Information discovered	Metrics collected	Used for
SNMP	Application type	Process level CPU utilization, Memory utilization	Performance Monitoring
Syslog	Application type	DNS name resolution activity: DNS Query Success and Failure by type	Security Monitoring and compliance

Event Types

In CMDB > Event Types, search for “isc bind” in the Device Type and Description column to see the event types associated with this device.

Rules

There are no predefined rules for this device.

Reports

There are no predefined reports for this device.

Configuration

SNMP

AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.

Syslog

Configure the ISC BIND DNS Server to Send Syslogs

1. Edit conf and add a new line: include /var/named/conf/logging.conf;.
2. Edit the /var/named/conf/logging.conf file, and in the channel queries_file { } section add syslog local3;
3. Restart BIND by issuing /etc/init.d/named restart.

Configure Syslog to Send to AccelOps

1. Edit conf and add a new line: Local7.* @<IP address of the AccelOps server>.
2. Restart the syslog daemon by issuing /etc/init.d/syslog restart.

Settings for Access Credentials

Sample BIND DNS Logs

Oracle Database Server Configuration

Supported Versions

What is Discovered and Monitored

Event Types

Rules

Reports

SNMP

JDBC for Database Performance Monitoring – Oracle Database Server

JDBC for Database Auditing – Oracle Database Server

Configuring listener log and error log via SNARE – Oracle side

Settings for Access Credentials

Sample Events

System Level Database Performance Metrics

Table Space Performance Metrics

Oracle Audit Trail (AccelOps Generated Events)

Oracle Audit Log

Oracle Listener Log

Oracle Alert Log

Supported Versions

Oracle Database 10g

Oracle Database 11g

Oracle Database 12c

What is Discovered and Monitored

Protocol	Information discovered	Metrics collected	Used for
SNMP	Application type	Process level CPU and memory utilization	Performance Monitoring
WMI	Application type, service mappings	Process level metrics: uptime, CPU utilization, Memory utilization, Read I/O KBytes/sec, Write I/O KBytes/sec	Performance Monitoring
JDBC		Generic database information: version, Character Setting, Archive Enabled, Listener Status, Instance Status, Last backup date,
JDBC		Database performance metrics: Buffer cache hit ratio, Row cache hit ratio, Library cache hit ratio, Shared pool free ratio, Wait time ratio, Memory Sorts ratio, Host CPU Util ratio, CPU Time ratio, Disk Read/Write rates (operations and MBps),  Network I/O Rate, Enqueue Deadlock rate, Database Request rate, User Transaction rate, User count, Logged on user count, Session Count, System table space usage, User table space usage, Temp table space usage, Last backup date, Days since last backup Table space performance metrics: Table space name, table space type, table space  usage, table space free space, table space next extent	Performance Monitoring
Syslog		Listener log, Alert log, Audit Log
JDBC	None	Database audit trail: Successful and failed database logon, Various database operation audit trail including CREATE/ALTER/DROP/TRUNCATE operations on tables, table spaces, databases, clusters, users, roles, views, table indices, triggers etc.	Security Monitoring

Event Types

In CMDB > Event Types, search for “oracle database” in the Description column to see the event types associated with this device.

Rules

In Analytics > Rules, search for “oracle database” in the Description column to see the rules associated with this application or device.

Reports

In Analytics > Reports, search for “oracle database” in the Name column to see the reports associated with this application or device. Configuration

SNMP

AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.

JDBC for Database Performance Monitoring – Oracle Database Server

To configure your Oracle Database Server for performance monitoring by AccelOps, you need to create a read-only user who has select permissions for the database. This is the user you will use to create the access credentials for AccelOps to communicate with your database server.

1. Open the SQLPlus application.
2. Log in with a system-level account.

Verify the permissions.

JDBC for Database Auditing – Oracle Database Server

2. Enable auditing by modifying the Oracle instance initialization file init<SID>.ora.

This is typically located in $ORACLE_BASE/admin/<SID>/pfile where DIS is the Oracle instance

Configuring listener log and error log via SNARE – Oracle side

1. Install and configure Epilog application to send syslog to AccelOps
2. Download Epilog from Epilog download site and install it on your Windows Server.
3. Launch Epilog from StartAll ProgramsInterSect AllianceEpilog for windows

 

1. Configure Epilog application as follows
   1. Select Log Configuration on left hand panel, click Add button to add Oracle Listener log file to be sent to AccelOps. Also make sure the Log Type is OracleListenerLog.
   2. Click Add button to add Oracle Alert log file to be sent to AccelOps. Also make sure the Log Type is OracleAlertLog.

• After adding both the files, SNARE Log Configuration will show both the files included as follows

1. Select Network Configuration on left hand panel. On the right, set the destination address to that of AccelOps server, port to 514 and make sure that syslog header is enabled. Then click Change Configuration button.
2. Click the “Apply the latest audit configuration” link on the left hand side to apply the changes to Epilog applications.

 

You can now configure AccelOps to communicate with your device by following the instructions in Setting Access Credentials for Device Discovery, and then initiate discovery of the device as described in the topics in Discovering Infrastructure.

System Level Database Performance Metrics

[PH_DEV_MON_PERF_ORADB]:[eventSeverity]=PHL_INFO, [hostIpAddr]=10.1.2.8,

[hostName]=Host-10.1.2.8, [appGroupName]=Oracle Database Server,

[appVersion]=Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 –

Production, [instanceName]=orcl, [instanceStatus]=OPEN,

[charSetting]=ZHS16GBK, [archiveEnabled]=FALSE,

[lastBackupDate]=1325566287,

[listenerStatus]=OPEN,[dbBufferCacheHitRatio]=100,[dbMemorySortsRatio]=1

00,[dbUserTransactionPerSec]=0.13,[dbPhysicalReadsPerSec]=0,

[dbPhysicalWritesPerSec]=0.48,[dbHostCpuUtilRatio]=0,[dbNetworkKBytesPer

Sec]=0.58,[dbEnqueueDeadlocksPerSec]=0,[dbCurrentLogonsCount]=32,[dbWait

TimeRatio]=7.13,[dbCpuTimeRatio]=92.87, [dbRowCacheHitRatio]=100,[dbLibraryCacheHitRatio]=99.91,[dbSharedPoolFre eRatio]=18.55,[dbSessionCount]=40,[dbIOKBytesPerSec]=33.26,[dbRequestsPe rSec]=3.24, [dbSystemTablespaceUsage]= 2.88,[dbTempTablespaceUsage]=

0,[dbUsersTablespaceUsage]= 0.01,[dbUserCount]=

2,[dbInvalidObjectCount]= 4

Table Space Performance Metrics

Oracle Audit Trail (AccelOps Generated Events)

Oracle Audit Log

<172>Oracle Audit[25487]: LENGTH : ‘153’ ACTION :[004] ‘bjn’ DATABASE

USER:[9] ‘user’ PRIVILEGE :[4] ‘NONE’ CLIENT USER:[9] ‘user’ CLIENT

TERMINAL:[14] ‘terminal’ STATUS:[1] ‘0’]

<172>Oracle Audit[6561]: LENGTH : ‘158’ ACTION :[6] ‘COMMIT’ DATABASE

USER:[8] ‘user’ PRIVILEGE :[6] ‘SYSDBA’ CLIENT USER:[6] ‘user’ CLIENT

TERMINAL:[0] ” STATUS:[1] ‘0’ DBID:[9] ‘200958341’

<172>Oracle Audit[28061]: LENGTH: 265 SESSIONID:[9] 118110747

ENTRYID:[5] 14188 STATEMENT:[5] 28375 USERID:[8] user ACTION:[3] 100 RETURNCODE:[1] 0 COMMENT$TEXT:[99] Authenticated by: DATABASE; Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.90.217.247)(PORT=4566)) PRIV$USED:[1] 5

Oracle Listener Log

Oracle Alert Log

DHCP and DNS Server Configuration

AccelOps supports these DHCP and DNS servers for discovery and monitoring.

Infoblox DNS/DHCP Configuration

ISC BIND DNS Configuration

Linux DHCP Configuration

Microsoft DHCP (2003, 2008) Configuration Microsoft DNS (2003, 2008) Configuration

Infoblox DNS/DHCP Configuration

What is Discovered and Monitored

Protocol	Information discovered	Metrics collected	Used for
SNMP	Host Name, Hardware model, Serial number, Network Interfaces, Running processes, Installed software	System CPU utilization, Memory utilization, Disk usage, Disk I/O	Performance Monitoring
SNMP		Process level CPU utilization, Memory utilization
SNMP		Zone Transfer metrics:  For each zone: DNS Responses Sent, Failed DNS Queries, DNS Referrals, Non-existent DNS Record Queries, DNS Non-existent Domain Queries, Recursive DNS Query Received DNS Cluster Replication metrics: DNS Replication Queue Status, Sent Queue From Master, Last Sent Time From Master, Sent Queue To Master, Last Sent Time To Master DNS Performance metrics: NonAuth DNS Query Count, NonAuth Avg DNS Latency, Auth DNS Query Count, Auth Avg DNS Latency, Invalid DNS Port Response, Invalid DNS TXID Response DHCP Performance metrics: Discovers/sec, Requests/Sec, Releases/Sec, Offers/sec, Acks/sec, Nacks/sec, Declines/sec, Informs/sec DDNS Update metrics: DDNS Update Success, DDNS Update Fail, DDNS Update Reject, DDNS Prereq Update Reject, DDNS Update Latency, DDNS Update Timeout DHCP subnet usage metrics: For each DHCP Subnet (addr, mask) – percent used	Security Monitoring and compliance
SNMP		Hardware status	Availability monitoring
SNMP Trap		Hardware failures, Software failures	Availability monitoring

Event Types

In CMDB > Event Types, search for “infoblox” in the Device Type and Description columns to see the event types associated with this device.

Rules

There are no predefined rules for this device.

Reports

In Analytics > Reports, search for “infoblox” in the Name and Description column to see the reports associated with this application or device. Configuration

SNMP

AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.

SNMP Trap

AccelOps processes events from this device via SNMP traps sent by the device. Configure the device to send send SNMP traps to AccelOps as directed in the device’s product documentation, and AccelOps will parse the contents.

Settings for Access Credentials

 

MySQL Server Configuration

What is Discovered and Monitored

Event Types

Rules

Reports

SNMP

JDBC for Database Auditing – MySQL Server

Settings for Access Credentials

Sample events

System Level Performance Metrics

Table Space Performance Metrics

System Level Performance Metrics

Logon/Logoff Events

Database CREATE/DELETE/MODIFY Events

Table CREATE/DELETE/MODIFY Events

What is Discovered and Monitored

Protocol	Information discovered	Metrics collected	Used for
SNMP	Application type	Process level CPU and memory utilization	Performance Monitoring
WMI	Application type, service mappings	Process level metrics: uptime, CPU utilization, Memory utilization, Read I/O KBytes/sec, Write I/O KBytes/sec	Performance Monitoring
JDBC		Generic database information: Version, Character Setting
JDBC		Database performance metrics:  User COnnections, Table Updates, table Selects, Table Inserts, Table Deletes, Temp Table Creates, Slow Queries, Query cache Hits, Queries registered in cache, Database Questions, Users, Live Threads Table space performance metrics: Table space name, table space type, Character set and Collation, table space usage, table space free space, Database engine, Table version, Table Row Format, Table Row Count, Average Row Length, Index File length, Table Create time, Table Update Time	Performance Monitoring
JDBC	None	Database audit trail: Successful and failed database log on, Database CREATE/DELETE/MODIFY operations, Table CREATE/DELETE/MODIFY/INSERT operations	Security Monitoring

Event Types

In CMDB > Event Types, search for “mysql” in the Device Type and Description columns to see the event types associated with this device.

Rules

In Analytics > Rules, search for “mysql” in the Name column to see the rules associated with this application or device.

Reports

In Analytics > Reports, search for “”mysql” in the Name and Description columns to see the reports associated with this application or device. Configuration

SNMP

AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.

JDBC for Database Auditing – MySQL Server

You need to configure your MySQL Server to write audit logs to a database table. This topic in the MySQL documentation explains more about how to set the destination tables for log outputs.

1. Start MySQL server with TABLE output enabled.
2. Login to mysql, run the following SQL commands to enable general.log in MyISAM.

You can now configure AccelOps to communicate with your device by following the instructions in Setting Access Credentials for Device Discovery, and then initiate discovery of the device as described in the topics in Discovering Infrastructure. Settings for Access Credentials

System Level Performance Metrics

Table Space Performance Metrics

<134>Apr 29 10:06:07 172.16.22.227 java: [PH_DEV_MON_PERF_MYSQLDB_TABLESPACE]: [eventSeverity]=PHL_INFO,

[appGroupName]=MySQL Database Server,

[instanceName]=mysql, [tablespaceName]=general_log, [tablespaceType]=PERMANENT, [tablespaceUsage]=0.01,

[tablespaceFreeSpace]=4193886,

[dbEngine]=MyISAM, [tableVersion]=10, [tableRowFormat]=dynamic,

[tableRows]=124, [tableAvgRowLength]=80, [tableIndexLength]=1024,

[tableCreateTime]=2013-04-29 15:12:30, [tableUpdateTime]=2013-04-29

12:35:46, [tableCollation]=utf8_general_ci

System Level Performance Metrics

Logon/Logoff Events

<134>Apr 29 15:14:54 abc-desktop java: [MYSQL_ Logon_Success]:

[eventSeverity]=PHL_INFO, [eventTime]=2013-04-29 15:14:54,

[rptIp]=172.16.22.227,

[srcIp]=172.16.22.227, [user]=admin, [logonTime]=2013-04-29 15:14:54,

[logoffTime]=, [actionName]=Connect, [msg]=admin@172.16.22.227 on

<134>Apr 10 14:29:22 abc-desktop java:

[MYSQL_Logoff]:[eventSeverity]=PHL_INFO, [eventTime]=2013-04-10

14:29:22, [rptIp]=172.16.22.227,

[srcIp]=172.16.22.227, [user]=admin, [logonTime]=,

[logoffTime]=2014-04-10 14:29:22, [actionName]=quit, [msg]=

<134>Apr 29 15:14:54 abc-desktop java: [MYSQL_ Logon_Fail]:

[eventSeverity]=PHL_WARN, [eventTime]=2013-04-29 15:14:54,

[rptIp]=172.16.22.227,

[srcIp]=172.16.22.227, [user]=admin, [logonTime]=2013-04-29 15:14:54,

[logoffTime]=, [actionName]=Connect, [msg]=Access denied for user ‘admin’@’172.16.22.227’ (using password:

YES)

Database CREATE/DELETE/MODIFY Events

Table CREATE/DELETE/MODIFY Events

<134>Apr 29 15:14:54 abc-desktop java: [MYSQL_Create_table]:

[eventSeverity]=PHL_INFO, [eventTime]=2013-04-29 15:14:54,

[rptIp]=172.16.22.227,

[srcIp]=172.16.22.227, [user]=admin, [actionName]=Query, [msg]=CREATE TABLE tutorials_tbl(     tutorial_id INT NOT NULL AUTO_INCREMENT, tutorial_title VARCHAR(100) NOT NULL,     tutorial_author VARCHAR(40) NOT NULL,     submission_date DATE,     PRIMARY KEY ( tutorial_id )    )

<134>Apr 29 15:14:54 abc-desktop java: [MYSQL_Delete_table]:

[eventSeverity]=PHL_INFO, [eventTime]=2013-04-29 15:14:54,

[rptIp]=172.16.22.227,

[srcIp]=172.16.22.227, [user]=admin, [actionName]=Query, [msg]=DELETE FROM tutorials_tbl WHERE tutorial_id=2NOT NULL,

tutorial_author VARCHAR(40) NOT NULL,     submission_date DATE,    PRIMARY KEY ( tutorial_id )

<134>Apr 29 15:14:54 abc-desktop java: [MYSQL_Insert_table]: [eventSeverity]=PHL_INFO, [eventTime]=2013-04-29 15:14:54,

[rptIp]=172.16.22.227,

[srcIp]=172.16.22.227, [user]=admin, [actionName]=Query, [msg]=INSERT INTO tutorials_tbl       (tutorial_title, tutorial_author, submission_date)      VALUES      (“Learn Java”, “John Smith”, NOW())

<134>Apr 29 15:14:54 abc-desktop java: [MYSQL_Drop_table]:

[eventSeverity]=PHL_INFO, [eventTime]=2013-04-29 15:14:54,

[rptIp]=172.16.22.227, [srcIp]=172.16.22.227, [user]=admin, [actionName]=Query, [msg]=DROP table sliutable

Microsoft SQL Server Scripts

SQL Server Database Level Event Creation Script (PH_Database_Level_Events.sql)

SQL Server DDL Event Creation Script (PH_DDL_Server_Level_Events.sql)

CREATE TRIGGER PH_DDL_Server_Level_Events

ON ALL SERVER

 

FOR DDL_ENDPOINT_EVENTS, DDL_LOGIN_EVENTS, DDL_GDR_SERVER_EVENTS,

DDL_AUTHORIZATION_SERVER_EVENTS,

CREATE_DATABASE, ALTER_DATABASE, DROP_DATABASE

/**FOR DDL_SERVER_LEVEL_EVENTS**/

AS

DECLARE @eventData AS XML;

SET @eventData = EVENTDATA(); /**declare @eventData as XML; set @eventData = EVENTDATA();**/

insert into PH_Events.dbo.DDLEvents(EventTime, EventType, SPID, ServerName, LoginName, ObjectName, ObjectType, SchemaName, DatabaseName, CommandText, XMLEvent) values(cast(@eventData.query(‘data(//PostTime)’) as varchar(64)),        cast(@eventData.query(‘data(//EventType)’) as varchar(128)),        cast(@eventData.query(‘data(//SPID)’) as varchar(128)),        cast(@eventData.query(‘data(//ServerName)’) as varchar(128)),        cast(@eventData.query(‘data(//LoginName)’) as varchar(128)),        cast(@eventData.query(‘data(//ObjectName)’) as varchar(128)),        cast(@eventData.query(‘data(//ObjectType)’) as varchar(128)),        cast(@eventData.query(‘data(//SchemaName)’) as varchar(128)),        cast(@eventData.query(‘data(//DatabaseName)’) as varchar(64)),        cast(@eventData.query(‘data(//TSQLCommand/CommandText)’) as varchar(128)),      /**  DB_NAME(),**/

@eventData);

SQL Server Table Creation Script (PH_EventDB_Tables_Create.sql)

 

SQL Server Trigger Creation Script (PH_LogonEventsTrigger.sql)

This script is to create a server level trigger called PH_LoginEvents. It will record all logon events when a user establishes a session to the database server. The trigger locates at the database server > Server Objects > Triggers.

Database Server Configuration

AccelOps supports these database servers for discovery and monitoring.

IBM DB2 Server Configuration

Microsoft SQL Server Configuration

Microsoft SQL Server Scripts

SQL Server Database Level Event Creation Script (PH_Database_Level_Events.sql)

SQL Server DDL Event Creation Script (PH_DDL_Server_Level_Events.sql)

SQL Server Table Creation Script (PH_EventDB_Tables_Create.sql)

SQL Server Trigger Creation Script (PH_LogonEventsTrigger.sql)

MySQL Server Configuration

Oracle Database Server Configuration

IBM DB2 Server Configuration

What is Discovered and Monitored

Protocol	Information discovered	Metrics collected	Used for
SNMP	Application type	Process level CPU and memory utilization	Performance Monitoring
WMI	Application type, service mappings	Process level metrics: uptime, CPU utilization, Memory utilization, Read I/O KBytes/sec, Write I/O KBytes/sec	Performance Monitoring
JDBC	None	Database audit trail: Successful and failed database log on, Database CREATE/DELETE/MODIFY operations, Table CREATE/DELETE/MODIFY/INSERT operations	Security Monitoring

Event Types

In CMDB > Event Types, search for “db2” in the Device Type and Description column to see the event types associated with this device.

Rules

There are no predefined rules for this device.

Reports

There are no predefined reports for this device.

Configuration

Configuring IBM DB2 Audit on Linux – DB2 side

1. Log in to IBM Installation Manager.
2. Click the Databases tab, and click the + icon to create a new Database Connection.
3. Enter these settings.

Field	Setting
Database Connection Name	Enter a name for the connection, such as AccelOps
Data Server Type	DB2 for Linux, Unix, and Windows
Database Name
Host name	db2.org
Port number	50000
JDBC Security	Clear text password
User ID	The username you want to use to access this Server from AccelOps
Password	The password you want to use with the User ID
JDBC URL	jdbc:db2://db2.org:50000/<databasename>:retrieveMessagesFromServerOnGetMessage=true;securit

4. In the Job Manager tab, click Add Job.
5. For Name, enter audit.
6. For Type, select DB2 CLP Script.
7. Click OK.
8. Add script.
9. Add schedule detail to audit task.
10. Add database to audit task.

You can now configure AccelOps to communicate with your device by following the instructions in Setting Access Credentials for Device Discovery, and then initiate discovery of the device as described in the topics in Discovering Infrastructure.

Configuring IBM DB2 Audit on Windows – DB2 side

1. Create a non-admin user on Windows, for example “AoAuditUser” , and set password
2. Login DB2 task center, add the user to DB Users, connect it to database 3. Grant Permission (use Administrator), use commands below
3. Create Catalog with db2admin
4. Create task in DB2 user Administrator:
   1. Open DB2 task center, create a task like below
   2. Add schedule
   3. Add task

 

IBMDB2_CHECKING_OBJECT <134>May 14 13:57:39 10.1.2.68 java: [IBMDB2_CHECKING_OBJECT]:[eventSeverity]=PHL_INFO,[objName]=TABLES,[srcI pAddr]=127.0.0.1,[srcApp]=DB2HMON,[dbName]=SAMPLE,[appVersion]=DB2 v10.1.0.0,[instanceName]=db2inst1,[eventTime]=2014-05-14-13.44.41.085567 ,[user]=db2inst1,[eventCategory]=CHECKING,[dbRetCode]=0

IBMDB2_CHECKING_FUNCTION <134>May 14 13:57:39 10.1.2.68 java: [IBMDB2_CHECKING_FUNCTION]:[eventSeverity]=PHL_INFO,[objName]=CHECKING,[ srcIpAddr]=127.0.0.1,[srcApp]=DB2HMON,[dbName]=SAMPLE,[appVersion]=DB2 v10.1.0.0,[instanceName]=db2inst1,[eventTime]=2014-05-14-13.44.40.739649 ,[user]=db2inst1,[eventCategory]=CHECKING,[dbRetCode]=0

IBMDB2_STATEMENT <134>May 14 13:57:40 10.1.2.68 java: [IBMDB2_STATEMENT]:[eventSeverity]=PHL_INFO,[srcIpAddr]=127.0.0.1,[srcAp p]=db2bp,[dbName]=SAMPLE,[appVersion]=DB2 v10.1.0.0,[instanceName]=db2inst1,[eventTime]=2014-05-14-13.48.59.433204 ,[user]=db2inst1,[eventCategory]=EXECUTE,[dbRetCode]=0

IBMDB2_COMMIT <134>May 14 13:57:40 10.1.2.68 java: [IBMDB2_COMMIT]:[eventSeverity]=PHL_INFO,[srcIpAddr]=10.1.2.81,[srcApp]= db2jcc_application,[dbName]=SAMPLE,[appVersion]=DB2 v10.1.0.0,[instanceName]=db2inst1,[eventTime]=2014-05-14-13.51.30.447924 ,[srcName]=SP81,[user]=db2inst1,[eventCategory]=EXECUTE,[dbRetCode]=0

IBMDB2_ROLLBACK <134>May 14 13:57:40 10.1.2.68 java:

[IBMDB2_ROLLBACK]:[eventSeverity]=PHL_INFO,[srcIpAddr]=127.0.0.1,[srcApp ]=db2bp,[dbName]=SAMPLE,[appVersion]=DB2 v10.1.0.0,[instanceName]=db2inst1,[eventTime]=2014-05-14-13.43.43.827986 ,[user]=db2inst1,[eventCategory]=EXECUTE,[dbRetCode]=0

IBMDB2_CONNECT <134>May 14 13:57:40 10.1.2.68 java:

[IBMDB2_CONNECT]:[eventSeverity]=PHL_INFO,[srcIpAddr]=127.0.0.1,[srcApp] =DB2HMON,[dbName]=SAMPLE,[appVersion]=DB2

v10.1.0.0,[instanceName]=db2inst1,[eventTime]=2014-05-14-13.44.39.991288 ,[user]=db2inst1,[eventCategory]=EXECUTE,[dbRetCode]=0

IBMDB2_CONNECT_RESET <134>May 14 13:57:40 10.1.2.68 java: [IBMDB2_CONNECT_RESET]:[eventSeverity]=PHL_INFO,[srcIpAddr]=127.0.0.1,[s rcApp]=db2bp,[dbName]=SAMPLE,[appVersion]=DB2 v10.1.0.0,[instanceName]=db2inst1,[eventTime]=2014-05-14-13.43.43.829149 ,[user]=db2inst1,[eventCategory]=EXECUTE,[dbRetCode]=0

IBMDB2_CREATE_OBJECT <134>May 14 13:57:40 10.1.2.68 java:

[IBMDB2_CREATE_OBJECT]:[eventSeverity]=PHL_INFO,[objName]=CAN_MONITOR=CA

N_MONITOR_FUNC,[srcIpAddr]=10.1.2.68,[srcApp]=DS_ConnMgt_,[dbName]=SAMPL E,[appVersion]=DB2 v10.1.0.0,[instanceName]=db2inst1,[eventTime]=2014-05-14-13.30.14.827242 ,[srcName]=10.1.2.68,[user]=db2inst1,[eventCategory]=OBJMAINT,[dbRetCode

]=0

IBMDB2_JDBC_PULL_STAT <134>May 14 13:57:39 10.1.2.68 java:

[IBMDB2_JDBC_PULL_STAT]:[eventSeverity]=PHL_INFO,[reptModel]=DB2,[dbName ]=SAMPLE,[instanceName]=db2inst1,[reptVendor]=IBM,[rptIp]=10.1.2.68,[aud itEventCount]=30,[relayIp]=10.1.2.68,[dbEventCategory]=db2inst1.AUDIT,[a ppGroupName]=IBM DB2 Server IBMDB2_ARCHIVE <134>May 14 13:57:39 10.1.2.68 java:

[IBMDB2_ARCHIVE]:[eventSeverity]=PHL_INFO,[srcIpAddr]=127.0.0.1,[srcApp] =db2bp,[dbName]=SAMPLE,[appVersion]=DB2 v10.1.0.0,[instanceName]=db2inst1,[eventTime]=2014-05-14-13.43.44.002046 ,[user]=db2inst1,[eventCategory]=AUDIT,[dbRetCode]=0

IBMDB2_EXTRACT <134>May 14 13:57:39 10.1.2.68 java:

[IBMDB2_EXTRACT]:[eventSeverity]=PHL_INFO,[srcIpAddr]=127.0.0.1,[srcApp] =db2bp,[dbName]=SAMPLE,[appVersion]=DB2 v10.1.0.0,[instanceName]=db2inst1,[eventTime]=2014-05-14-13.38.45.865016 ,[user]=db2inst1,[eventCategory]=AUDIT,[dbRetCode]=0

IBMDB2_LIST_LOGS <134>May 14 14:03:39 10.1.2.68 java:

[IBMDB2_LIST_LOGS]:[eventSeverity]=PHL_INFO,[srcIpAddr]=127.0.0.1,[srcAp

Microsoft SQL Server Configuration

What is Discovered and Monitored

Enabling SNMP on Windows Server 2003

Enabling SNMP on Windows 7 or Windows Server 2008 R2

Creating a Generic User Who Does Not Belong to the Local Administrator Group

Creating a User Who Belongs to the Domain Administrator Group

JDBC for Performance Monitoring

Create a Read-Only User to Access System Tables

JDBC for Database Audit Trail Collection

Create a Read-Only User to Access System Tables

Settings for Access Credentials

Sample Events

Per Instance Performance Metrics

Per Instance, per Database Performance Metrics

Generic Info

Config Info

Locking Info

Blocking Info

Error Log

Logon Events

DDL Events – Create Database

DDL Events – Create index

Supported Versions

SQL Server 2005

SQL Server 2008

SQL Server 2008 R2

SQL Server 2012

SQL Server 2014

What is Discovered and Monitored

The following protocols are used to discover and monitor various aspects of Microsoft SQL server.

Protocol	Information discovered	Metrics collected	Used for
SNMP	Application type	Process level CPU and memory utilization	Performance Monitoring
WMI	Application type, service mappings	Process level metrics: uptime, CPU utilization, Memory utilization, Read I/O KBytes/sec, Write I/O KBytes/sec	Performance Monitoring
WMI		Windows application event logs – successful and failed login	Security Monitoring
JDBC		General database info: database name, database version, database size, database owner, database created date, database status, database compatibility level Database configuration Info: Configure name, Configure value, Configure max and min value, Configure running value Database backup Info: Database name, Last backup date, Days since last backup	Availability Monitoring
JDBC		Database performance metrics (per-instance): Buffer cache hit ratio, Log cache hit ratio, Transactions /sec, Page reads/sec, Page writes/sec, Page splits/sec, Full scans/sec, Deadlocks/sec, Log flush waits/sec, Latch waits/sec,  Data file(s) size, Log file(s) used, Log growths, Log shrinks, User connections, Target server memory, Total Server Memory, Active database users, Logged-in database users, Available buffer pool pages, Free buffer pool pages, Average wait time Database performance metrics (per-instance, per-database):  Database name, Data file size, Log file used, Log growths, Log shrinks, Log flush waits/sec, Transaction /sec, Log cache hit ratio	Performance Monitoring
JDBC		Locking info: Database id, Database object id, Lock type, Locked resource, Lock mode, Lock status Blocking info: Blocked Sp Id, Blocked Login User, Blocked Database, Blocked Command, Blocked Process Name, Blocking Sp Id,  Blocking Login User, Blocking Database, Blocking Command, Blocking Process Name, Blocked duration	Performance Monitoring
JDBC		Database error log Database audit trail: Failed database logon is also collected through performance monitoring as logon failures cannot be collected via database triggers.	Availability / Performance Monitoring
JDBC	None	Database audit trail: Successful and failed database logon, Various database operation audit trail including CREATE/ALTER/DROP/TRUNCATE operations on tables, table spaces, databases, clusters, users, roles, views, table indices, triggers etc.	Security Monitoring and compliance

Event Types

In CMDB > Event Types, search for “sql server” in the Device Name and Description column to see the event types associated with this device.

Rules

In Analytics > Rules, search for ” sql server” in the Name column to see the rules associated with this application or device.

Reports

In Analytics > Reports, search for “sql server” in the Name column to see the reports associated with this application or device. Configuration

SNMP

Enabling SNMP on Windows Server 2003

SNMP is typically enabled by default on Windows Server 2003, but you will still need to add AccelOps to the hosts that are authorized to accept SNMP packets. First you need to make sure that the SNMP Management tool has been enabled for your device.

1. In the Start menu, go to Administrative Tools > Services.
2. Go to Control Panel > Add or Remove Programs.
3. Click Add/Remove Windows Components.
4. Select Management and Monitoring Tools and click Details.

Make sure that Simple Network Management Tool is selected.

If it isn’t selected, select it, and then click Next to install.

5. Go to Start > Administrative Tools > Services.
6. Select and open SNMP Service.
7. Click the Security
8. Select Send authentication trap.
9. Under Accepted communities, make sure there is an entry for public that is set to read-only.
10. Select Accept SNMP packets from these hosts.
11. Click
12. Enter the IP address for your AccelOps virtual appliance that will access your device over SNMP.
13. Click Add.
14. Click Apply.
15. Under SNMP Service, click Restart service.

Enabling SNMP on Windows 7 or Windows Server 2008 R2

SNMP is typically enabled by default on Windows Server 2008, but you will still need to add AccelOps to the hosts that are authorized to accept SNMP packets. First you should check that SNMP Services have been enabled for your server.

1. Log in to the Windows 2008 Server where you want to enable SNMP as an administrator.
2. In the Start menu, select Control Panel.
3. Under Programs, click Turn Windows features on/off.
4. Under Features, see if SNMP Services is installed.

If not, click Add Feature, then select SMNP Service and click Next to install the service.

5. In the Server Manager window, go to Services > SNMP Services.
6. Select and open SNMP Service.
7. Click the Security
8. Select Send authentication trap.
9. Under Accepted communities, make sure there is an entry for public that is set to read-only.
10. Select Accept SNMP packets from these hosts.
11. Click
12. Enter the IP address for your AccelOps virtual appliance that will access your device over SNMP.
13. Click Add.
14. Click Apply.
15. Under SNMP Service, click Restart service.

WMI

Configuring WMI on your device so AccelOps can discover and monitor it requires you to create a user who has access to WMI objects on the device. There are two ways to do this:

Creating a Generic User Who Does Not Belong to the Local Administrator Group

Creating a User Who Belongs to the Domain Administrator Group

Creating a Generic User Who Does Not Belong to the Local Administrator Group

Log in to the machine you want to monitor with an administrator account.

Enable Remote WMI Requests by Adding a Monitoring Account to the Distributed COM Users Group and the Performance Monitor Users Group

1. Go to Start > Control Panel > Administrative Tools > Computer Management > Local Users and Groups.
2. Right-click Users and select Add User.
3. Create a user.
4. Go to Groups, right-click Distributed COM Users, and then click Add to group.
5. In the Distributed COM Users Properties dialog, click Add.
6. Find the user you created, and then click OK.

This is the account you will need to use in setting up the Performance Monitor Users group permissions.

7. Click OK in the Distributed COM Users Properties dialog, and then close the Computer Management dialog.
8. Repeat steps 4 through 7 for the Performance Monitor Users group. Enable DCOM Permissions for the Monitoring Account
9. Go to Start > Control Panel > Administrative Tools > Component Services.
10. Right-click My Computer, and then Properties.
11. Select the COM Security tab, and then under Access Permissions, click Edit Limits.
12. Make sure that the Distributed COM Users group and the Performance Monitor Users group have Local Access and Remote Access set to
13. Click OK.
14. Under Access Permissions, click EditDefault.
15. Make sure that the Distributed COM Users group and the Performance Monitor Users group have Local Access and Remote Access set to
16. Click
17. Under Launch and Activation Permissions, click Edit Limits.
18. Make sure that the Distributed COM Users group and the Performance Monitor Users group have the permissions Allow for Local Launch, Remote Launch, Local Activation, and Remote Activation.
19. Click OK.
20. Under Launch and Activation Permissions, click Edit Defaults.
21. Make sure that the Distributed COM Users group and the Performance Monitor Users group have the permissions Allow for Local Launch, Remote Launch, Local Activation, and Remote Activation.

See the sections on Enabling WMI Privileges and Allowing WMI Access through the Windows Firewall in the Domain Admin User set up instructions for the remaining steps to configure WMI.

Creating a User Who Belongs to the Domain Administrator Group

Log in to the Domain Controller with an administrator account.

Enable remote WMI requests by Adding a Monitoring Account to the Domain Administrators Group

1. Go to Start > Control Pane > Administrative Tools > Active Directory Users and Computers > Users.
2. Right-click Users and select Add User.
3. Create a user for the @accelops.com domain.

For example, YJTEST@accelops.com.

4. Go to Groups, right-click Administrators, and then click Add to Group.
5. In the Domain Admins Properties dialog, select the Members tab, and then click Add.
6. For Enter the object names to select, enter the user you created in step 3.
7. Click OK to close the Domain Admins Properties dialog.
8. Click OK.

Enable the Monitoring Account to Access the Monitored Device

Log in to the machine you want to monitor with an administrator account. Enable DCOM Permissions for the Monitoring Account

1. Go to Start > Control Panel > Administrative Tools > Component Services.
2. Right-click My Computer, and then select Properties.
3. Select the Com Security tab, and then under Access Permissions, click Edit Limits.
4. Find the user you created for the monitoring account, and make sure that user has the permission Allow for both Local Access and Re mote Access.
5. Click OK.
6. In the Com Security tab, under Access Permissions, click Edit Defaults.
7. Find the user you created for the monitoring account, and make sure that user has the permission Allow for both Local Access and Re mote Access.
8. Click OK.
9. In the Com Security tab, under Launch and Activation Permissions, click Edit Limits.
10. Find the user you created for the monitoring account, and make sure that user has the permission Allow for Local Launch, Remote Launch, Local Activation, and Remote Activation.
11. In the Com Security tab, under Launch and Activation Permissions, click Edit Defaults.
12. Find the user you created for the monitoring account, and make sure that user has the permission Allow for Local Launch, Remote Launch, Local Activation, and Remote Activation.

Enable Account Privileges in WMI

The monitoring account you created must have access to the namespace and sub-namespaces of the monitored device.

1. Go to Start > Control Panel > Administrative Tools > Computer Management > Services and Applications.
2. Select WMI Control, and then right-click and select Properties.
3. Select the Security
4. Expand the Root directory and select CIMV2.
5. Click Security.
6. Find the user you created for the monitoring account, and make sure that user has the permission Allow for Enable Account and Remot e Enable.
7. Click Advanced.
8. Select the user you created for the monitoring account, and then click Edit.
9. In the Apply onto menu, select This namespace and subnamespaces.
10. Click OK to close the Permission Entry for CIMV2 dialog.
11. Click OK to close the Advanced Security Settings for CIMV2 dialog.
12. In the left-hand navigation, under Services and Applications, select Services.
13. Select Windows Management Instrumentation, and then click Restart. Allow WMI to Connect Through the Windows Firewall (Windows 2003)
14. In the Start menu, select Run.
15. Run msc.
16. Go to Local Computer Policy > Computer Configuration > Administrative Templates > Network > Network Connections > Windows Firewall.
17. Select Domain Profile or Standard Profile depending on whether the device you want to monitor is in the domain or not.
18. Select Windows Firewall: Allow remote administration exception.
19. Run exe and enter these commands:
20. Restart the server.

Allow WMI through Windows Firewall (Windows Server 2008, 2012)

1. Go to Control Panel > Windows Firewall.
2. In the left-hand navigation, click Allow a program or feature through Windows Firewall.
3. Select Windows Management Instrumentation, and the click OK.

JDBC for Performance Monitoring

Creating an User for SQL Server Monitoring

A regular Windows account cannot be used for SQL Server monitoring. AccelOps runs on Linux and certain windows libraries needed to do so are not available on Linux. You have to create a separate user with read-only privileges.

Create a Read-Only User to Access System Tables

1. Log in to your SQL Server with an sa account, and then create a read-only user to access system tables.
2. Log in with your newly created read-only account and run these commands.

Check to see if you get the same results with your read-only account as you do with your sa account.

3. The following additional configuration steps should be performed for the collection of Logon Failures.
   1. For Server 2012 – https://technet.microsoft.com/en-us/library/ms175850(v=sql.110).aspx
   2. For Server 2014 – https://technet.microsoft.com/sr-latn-rs/library/ms175850(v=sql.120)
   3. For Server 2016 – https://msdn.microsoft.com/en-us/library/ms175850.aspx

JDBC for Database Audit Trail Collection

Creating a User for SQL Server Monitoring

A regular Windows account cannot be used for SQL Server monitoring. AccelOps runs on Linux and certain windows libraries needed to do so are not available on Linux. You have to create a separate user with read-only privileges.

Create a Read-Only User to Access System Tables

1. Log in to your SQL Server with an sa account, and then create a read-only user to access system tables.

1. Save the four SQL Server Scripts attached to this topic to My Documents > SQL Server Management Studio > Projects as four separate files.
2. Login to SQL Server Management Studio with an sa account.
3. Browse to and execute the Database and Table Creation script to create the database and tables.
4. Browse to and execute the Logon Trigger Creation script to create triggers.

SQL Server introduced Logon Trigger in SQL Server 2005 SP2, so the database version must be greater than 2005 SP2 for logon trigger creation to succeed.

5. Browse to and execute the DDL Server Level Trigger Creation script to create database events.

You can now configure AccelOps to communicate with your device by following the instructions in Setting Access Credentials for Device Discovery, and then initiate discovery of the device as described in the topics in Discovering Infrastructure. Settings for Access Credentials

 

Creating a Database Truncate Script

Since audit tables grow after time, it is often a good idea to create a database truncate script that can run as a maintenance task and keep the table size under control.  it is often necessary to create a database truncate procedure as follows

 

1. Log into Microsoft SQL Management Studio and connect to the DB instance.
2. Under Management, go to Maintenance Plans, and create a new plan with the name
3. For Subplan, enter TRUNCATE, and for Description, enter TRUNCATE TABLE.
4. Click the Calendar icon to create a recurring, daily task starting at 12:00AM and running every 30 minutes until 11:59:59PM.
5. Go to View > Tool Box > Execute T-SQL Statement.

A T-SQL box will be added to the subplan.

6. In the T-SQL box, enter this command.
7. Click OK.
8. You will be able to see the history of this script’s actions by right-clicking on the maintenance task, and then selecting View History.

Sample Events

Per Instance Performance Metrics

 

<134>Apr 16 10:17:56 172.16.22.100 java:

[PH_DEV_MON_PERF_MSSQL_SYS|PH_DEV_MON_PERF_MSSQL_SYS]:[eventSeverity]=PH

L_INFO,[hostIpAddr]=172.16.22.100,[hostName]=wwwin.accelops.net,

[appGroupName]=Microsoft SQL Server,[dbDataFileSizeKB]=13149056,[dbLogFileUsedKB]=26326,[dbLogGrowthC ount]=4,[dbLogShrinkCount]=0,[dbLogFlushPerSec]=1.69,[dbTransPerSec]=4.4 4, [dbDeadLocksPerSec]=0,[dbLogCacheHitRatio]=60.01,[dbUserConn]=16,[dbTarg etServerMemoryKB]=1543232,[dbTotalServerMemoryKB]=1464760,[dbPageSplitsP erSec]=0.45, [dbPageWritesPerSec]=0.01,[dbLatchWaitsPerSec]=0.77,[dbPageReadsPerSec]= 0.01,[dbFullScansPerSec]=1.83,[dbBufferCacheHitRatio]=100,[dbCount]=8,[d bUserCount]=25, [dbLoggedinUserCount]=2,[dbPagesInBufferPool]=116850,[dbPagesFreeInBuffe rPool]=2336,[dbAverageWaitTimeMs]=239376, [appVersion]=Microsoft SQL Server 2008 R2 (RTM) – 10.50.1600.1

(X64),[serverName]=WIN-08-VCENTER,[instanceName]=MSSQLSERVER,[appPort]=1

433

Per Instance, per Database Performance Metrics

[PH_DEV_MON_PERF_MSSQL_PERDB]:[eventSeverity]=PHL_INFO,[hostIpAddr]=172. 16.22.100,[hostName]=wwwin.accelops.net,[dbName]=tempdb,[appGroupName]=M icrosoft SQL Server, [dbDataFileSizeKB]=109504,[dbLogFileUsedKB]=434,[dbLogGrowthCount]=4,[db LogShrinkCount]=0,[dbTransPerSec]=0.96,[dbLogFlushPerSec]=0.01,[dbLogCac heHitRatio]=44.44, [appVersion]=Microsoft SQL Server 2008 R2 (RTM) – 10.50.1600.1

(X64),[serverName]=WIN-08-VCENTER,[instanceName]=MSSQLSERVER,[appPort]=1

433

Generic Info

[PH_DEV_MON_PERF_MSSQL_GEN_INFO]:[eventSeverity]=PHL_INFO,[dbName]= tempdb,[dbSize]= 3.0,[dbowner]= sa,[dbId]= 2,[dbcreated]= 1321545600, [dbstatus]= Status=ONLINE; Updateability=READ_WRITE;

UserAccess=MULTI_USER; Recovery=SIMPLE; Version=655;

Collation=SQL_Latin1_General_CP1_CI_AS; SQLSortOrder=52;

IsAutoCreateStatistics; IsAutoUpdateStatistics,

[dbcompatibilityLevel]= 100,[spaceAvailable]= 0.9,[appVersion]=

Microsoft SQL Server 2008 (RTM) – 10.0.1600.22 (Intel X86),[serverName]=

WIN03MSSQL\SQLEXPRESS

Config Info

Locking Info

Blocking Info

[PH_DEV_MON_PERF_MSSQL_BLOCKBY_INFO]:[eventSeverity]=PHL_INFO,[blockedSp Id]= 51,[blockedLoginUser]= WIN03MSSQL\Administrator,[blockedDbName]= msdb, [blockedCommand]= UPDATE,[blockedProcessName]= Microsoft SQL Server

Management Studio – Query,[blockingSpId]= 54,[blockingLoginUser]=

WIN03MSSQL\Administrator,

[blockingDbName]= msdb,[blockingCommand]= AWAITING

COMMAND,[blockingProcessName]= Microsoft SQL Server Management Studio –

Query,[blockedDuration]= 5180936,

[appVersion]= Microsoft SQL Server 2008 (RTM) – 10.0.1600.22 (Intel

X86),[serverName]= WIN03MSSQL\SQLEXPRESS

Error Log

Logon Events

134>Feb 08 02:55:34 10.1.2.54 java:

[MSSQL_Logon_Success]:[eventSeverity]=PHL_INFO, [eventTime]=2014-02-08 02:54:00.977, [rptIp]=10.1.2.54, [relayIp]=10.1.2.54, [srcName]=<local machine>, [user]=NT SERVICE\ReportServer$MSSQLSERVEJIANFA, [srcApp]=Report Server, [instanceName]=MSSQLSERVEJIANFA, [procId]=52,

[loginType]=Windows (NT) Login,

[securityId]=AQYAAAAAAAVQAAAALJAZf5XMbcLh8PUDY31LioZ3Uwo=, [isPooled]=1,

[destName]=WIN-S2EDLFIUPQK, [destPort]=1437,

DDL Events – Create Database

<134>Sep 29 15:34:48 10.1.2.54 java:

[MSSQL_Create_database]:[eventSeverity]=PHL_INFO, [eventTime]=2013-09-29

15:34:05.687, [rptIp]=10.1.2.54, [relayIp]=10.1.2.54,

[user]=WIN-S2EDLFIUPQK\Administrator, [dbName]=JIANFA,

[instanceName]=MSSQLSERVER, [objName]=, [procId]=59, [command]=CREATE

DATABASE JIANFA, [destName]=WIN-S2EDLFIUPQK, [destPort]=1433,

DDL Events – Create index

<134>Sep 29 15:34:48 10.1.2.54 java:

[MSSQL_Create_index]:[eventSeverity]=PHL_INFO, [eventTime]=2013-09-29

15:30:40.557, [rptIp]=10.1.2.54, [relayIp]=10.1.2.54,

[user]=WIN-S2EDLFIUPQK\Administrator, [dbName]=master,

[instanceName]=MSSQLSERVER, [objName]=IndexTest, [procId]=58,

[command]=create index IndexTest on dbo.MSreplication_options(optname);,

[schemaName]=dbo, [objType]=INDEX, [destName]=WIN-S2EDLFIUPQK,

[destPort]=1433

 

 

 

 

 

CyberArk Password Vault Configuration

What is Discovered and Monitored

Protocol	Information discovered	Logs parsed	Used for
Syslog (CEF formatted and others)		CyberArk Safe Activity	Security Monitoring and compliance

Event Types

In CMDB > Event Types, search for “CyberArk-Vault” in the Device Type column to see close to 400 event types associated with this device.

Rules

In Analytics > Rules, search for “CyberArk”:

CyberArk Vault Blocked Failure

CyberArk Vault CPM Password Disables

CyberArk Vault Excessive Failed PSM Connections

CyberArk Vault Excessive Impersonations

CyberArk Vault Excessive PSM Keystroke Logging Failure

CyberArk Vault Excessive PSM Session Monitoring Failure

CyberArk Vault Excessive Password Release Failure

CyberArk Vault File Operation Failure

CyberArk Vault Object Content Validation Failure

CyberArk Vault Unauthorized User Stations

CyberArk Vault User History Clear

Reports

In Analytics > Reports, search for “CyberArk”:

CyberArk Blocked Operations

CyberArk CPM Password Disables

CyberArk CPM Password Retrieval

CyberArk File Operation Failures

CyberArk Impersonations

CyberArk Object Content Validation Failures

CyberArk PSM Monitoring Failures

CyberArk Password Resets

CyberArk Privileged Command Operations

CyberArk Provider Password Retrieval

CyberArk Trusted Network Area Updates

CyberArk Unauthorized Stations

CyberArk User History Clears

CyberArk User/Group Modification Activity

CyberArk Vault CPM Password Reconcilations

CyberArk Vault CPM Password Verifications

CyberArk Vault Configuration Changes

CyberArk Vault Failed PSM connections

CyberArk Vault Modification Activity

CyberArk Vault PSM Keystore Logging Failures

CyberArk Vault Password Changes from CPM

CyberArk Vault Password Release Failures

CyberArk Vault Successful PSM Connections

Top CyberArk Event Types

Top CyberArk Safes, Folders By Activity

Top CyberArk Users By Activity

CyberArk Configuration for sending syslog in a specific format

1. Open \PrivateArk\Server\DBParm.ini file and edit the SYSLOG section:
   1. SyslogServerIP – Specify AccelOps supervisor, workers and collectors separated by commas.
   2. SyslogServerProtocol – Set to the default value of UDP.
   3. SyslogServerPort – Set to the default value of 514.
   4. SyslogMessageCodeFilter – Set to the default range 0-999.
   5. SyslogTranslatorFile – Set to Syslog\AccelOps.xsl.
   6. UseLegacySyslogFormat – Set to the default value of No.
2. Copy the relevant XSL translator file to the Syslog subfolder specified in the SyslogTranslatorFile parameter in DBParm.ini.
3. Stop and Start Vault (Central Server Administration) for the changes to take effect.

Make sure the syslog format is as follows.

<5>1 2016-02-02T17:24:42Z SJCDVVWCARK01 CYBERARK: Product=”Vault”;Version=”9.20.0000″;MessageID=”295″;Message=”Retrieve password”;Issuer=”Administrator”;Station=”10.10.110.11″;File=”Root\snmpC ommunity”;Safe=”TestPasswords”;Reason=”Test”;Severity=”Info” <30>Mar 22 20:13:42 VA461_1022 CyberArk AIM[2453]: APPAP097I Connection to the Vault has been restored <27>Mar 22 20:10:50 VA461_1022 CyberArk AIM[2453]: APPAP289E Connection to the Vault has failed. Further attempts to connect to the Vault will be avoided for [1] minutes. <27>Mar 24 23:41:58 VA461_1022 CyberArk AIM[2453]: APPAU002E Provider

[Prov_VA461_1022] has failed to fetch password with query [Safe=TestPutta;Object=Telnet91] for application [AccelOps]. Fetch reason: [APPAP004E Password object matching query

Authentication Server Configuration

AccelOps supports these authentication servers for discovery and monitoring.

Cisco Access Control Server (ACS) Configuration

Microsoft Internet Authentication Server (IAS) Configuration

Juniper Networks Steel-Belted RADIUS Configuration

Vasco DigiPass Configuration

CyberArk Password Vault Configuration

Cisco Access Control Server (ACS) Configuration

Creating a Generic User Who Does Not Belong to the Local Administrator Group

Enable Remote WMI Requests by Adding a Monitoring Account to the Distributed COM Users Group and the Performance Monitor Users Group

Enable DCOM Permissions for the Monitoring Account

Creating a User Who Belongs to the Domain Administrator Group

Enable remote WMI requests by Adding a Monitoring Account to the Domain Administrators Group

Enable the Monitoring Account to Access the Monitored Device

Enable DCOM Permissions for the Monitoring Account

Enable Account Privileges in WMI

Allow WMI to Connect Through the Windows Firewall (Windows 2003)

Allow WMI through Windows Firewall (Windows Server 2008, 2012) Syslog

Settings for Access Credentials

What is Discovered and Monitored

Protocol	Information discovered	Metrics collected	Used for
SNMP	Application type	Process level CPU utilization, Memory utilization	Performance Monitoring
WMI	Application type, service mappings	Process level metrics: uptime, CPU Utilization, Memory utilization, Read I/O, Write I/O	Performance Monitoring
Syslog	Application type	Successful and Failed Authentications, Successful and Failed administrative logons, RADIUS accounting logs	Security Monitoring and compliance

Event Types

In CMDB > Event Types, search for “cisco secure acs” in the Device Type and Description column to see the event types associated with this device.

Rules

There are no predefined rules for this device.

Reports

There are no predefined reports for this device.

Configuration

SNMP

1. Log into the device you want to enable SNMP for as an administrator.
2. Go to Control Panel >Program and Features.
3. Click Turn Windows features on or off .
4. If you are installing on a Windows 7 device, select Simple Network Management Protocol (SNMP).

If you are installing on a Windows 2008 device, in the Server Manager window, go to Features > Add features > SNMP Services.

5. If necessary, select SNMP to enable the service.
6. Go to Programs > Administrative Tools > Services.
7. to set the SNMP community string and include AccelOps in the list of hosts that can access this server via SNMP.
8. Select SNMP Service and right-click Properties.
9. Set the community string to public.
10. Go to the Security tab and enter the AccelOps IP Address.
11. Restart the SNMP service.

WMI

Configuring WMI on your device so AccelOps can discover and monitor it requires you to create a user who has access to WMI objects on the device. There are two ways to do this:

Creating a Generic User Who Does Not Belong to the Local Administrator Group

Creating a User Who Belongs to the Domain Administrator Group

Creating a Generic User Who Does Not Belong to the Local Administrator Group

Log in to the machine you want to monitor with an administrator account.

Enable Remote WMI Requests by Adding a Monitoring Account to the Distributed COM Users Group and the Performance Monitor Users Group

1. Go to Start > Control Panel > Administrative Tools > Computer Management > Local Users and Groups.
2. Right-click Users and select Add User.
3. Create a user.
4. Go to Groups, right-click Distributed COM Users, and then click Add to group.
5. In the Distributed COM Users Properties dialog, click Add.
6. Find the user you created, and then click OK.

This is the account you will need to use in setting up the Performance Monitor Users group permissions.

7. Click OK in the Distributed COM Users Properties dialog, and then close the Computer Management dialog.
8. Repeat steps 4 through 7 for the Performance Monitor Users group. Enable DCOM Permissions for the Monitoring Account
9. Go to Start > Control Panel > Administrative Tools > Component Services.
10. Right-click My Computer, and then Properties.
11. Select the COM Security tab, and then under Access Permissions, click Edit Limits.
12. Make sure that the Distributed COM Users group and the Performance Monitor Users group have Local Access and Remote Access set to
13. Click OK.
14. Under Access Permissions, click EditDefault.
15. Make sure that the Distributed COM Users group and the Performance Monitor Users group have Local Access and Remote Access set to
16. Click
17. Under Launch and Activation Permissions, click Edit Limits.
18. Make sure that the Distributed COM Users group and the Performance Monitor Users group have the permissions Allow for Local Launch, Remote Launch, Local Activation, and Remote Activation.
19. Click OK.
20. Under Launch and Activation Permissions, click Edit Defaults.
21. Make sure that the Distributed COM Users group and the Performance Monitor Users group have the permissions Allow for Local Launch, Remote Launch, Local Activation, and Remote Activation.

See the sections on Enabling WMI Privileges and Allowing WMI Access through the Windows Firewall in the Domain Admin User set up instructions for the remaining steps to configure WMI.

Creating a User Who Belongs to the Domain Administrator Group

Log in to the Domain Controller with an administrator account.

Enable remote WMI requests by Adding a Monitoring Account to the Domain Administrators Group

1. Go to Start > Control Pane > Administrative Tools > Active Directory Users and Computers > Users.
2. Right-click Users and select Add User.
3. Create a user for the @accelops.com domain.

For example, YJTEST@accelops.com.

4. Go to Groups, right-click Administrators, and then click Add to Group.
5. In the Domain Admins Properties dialog, select the Members tab, and then click Add.
6. For Enter the object names to select, enter the user you created in step 3.
7. Click OK to close the Domain Admins Properties dialog.
8. Click OK.

Enable the Monitoring Account to Access the Monitored Device

Log in to the machine you want to monitor with an administrator account. Enable DCOM Permissions for the Monitoring Account

1. Go to Start > Control Panel > Administrative Tools > Component Services.
2. Right-click My Computer, and then select Properties.
3. Select the Com Security tab, and then under Access Permissions, click Edit Limits.
4. Find the user you created for the monitoring account, and make sure that user has the permission Allow for both Local Access and Re mote Access.
5. Click OK.
6. In the Com Security tab, under Access Permissions, click Edit Defaults.
7. Find the user you created for the monitoring account, and make sure that user has the permission Allow for both Local Access and Re mote Access.
8. Click OK.
9. In the Com Security tab, under Launch and Activation Permissions, click Edit Limits.
10. Find the user you created for the monitoring account, and make sure that user has the permission Allow for Local Launch, Remote Launch, Local Activation, and Remote Activation.
11. In the Com Security tab, under Launch and Activation Permissions, click Edit Defaults.
12. Find the user you created for the monitoring account, and make sure that user has the permission Allow for Local Launch, Remote Launch, Local Activation, and Remote Activation.

Enable Account Privileges in WMI

The monitoring account you created must have access to the namespace and sub-namespaces of the monitored device.

1. Go to Start > Control Panel > Administrative Tools > Computer Management > Services and Applications.
2. Select WMI Control, and then right-click and select Properties.
3. Select the Security
4. Expand the Root directory and select CIMV2.
5. Click Security.
6. Find the user you created for the monitoring account, and make sure that user has the permission Allow for Enable Account and Remot e Enable.
7. Click Advanced.
8. Select the user you created for the monitoring account, and then click Edit.
9. In the Apply onto menu, select This namespace and subnamespaces.
10. Click OK to close the Permission Entry for CIMV2 dialog.
11. Click OK to close the Advanced Security Settings for CIMV2 dialog.
12. In the left-hand navigation, under Services and Applications, select Services.
13. Select Windows Management Instrumentation, and then click Restart. Allow WMI to Connect Through the Windows Firewall (Windows 2003)
14. In the Start menu, select Run.
15. Run msc.
16. Go to Local Computer Policy > Computer Configuration > Administrative Templates > Network > Network Connections > Windows Firewall.
17. Select Domain Profile or Standard Profile depending on whether the device you want to monitor is in the domain or not.

• Select Windows Firewall: Allow remote administration exception.

6. Run exe and enter these commands:
7. Restart the server.

Allow WMI through Windows Firewall (Windows Server 2008, 2012)

1. Go to Control Panel > Windows Firewall.
2. In the left-hand navigation, click Allow a program or feature through Windows Firewall.
3. Select Windows Management Instrumentation, and the click OK.

Syslog

1. Log in to your Cisco Access Controls Server as an administrator.
2. Go to Start > All Programs > CiscoSecure ACS v4.1 > ACS Admin.
3. In the left-hand navigation, click System Configuration, then click Logging.
4. Select Syslog for Failed Attempts, Passed Authentication, and RADIUS Accounting to send these reports to AccelOps.
5. For each of these reports, click Configure under CSV, and select the following attributes to include in the CSV output.

Report	CSV Attributes
Failed Attempts	Message-Type User-Name NAS-IP-Address Authen-Failure-Code Author-Failure-Code Caller-ID NAS-Port Author-Date Group-Name Filter Information Access Device AAA Server
Passed Authentication	Message-Type User-Name NAS-IP-Address Authen-Failure-Code Author-Failure-Code Caller-ID NAS-Port Author-Date Group-Name Filter Information Access Device AAA Server Proxy-IP-Address Source-NAS PEAP/EAP-FAST-Clear-Name Real Name
RADIUS Accounting	User-Name NAS-IP-Address NAS-Port Group-Name Service-Type Framed-Protocol Framed-IP-Address Calling-Station-Id Acct-Status-Type Acct-Input-Octets Acct-Output-Octets Acct-Session-Id Acct-Session-Time Acct-Input-Packets Acct-Output-Packets

6. For each of these reports, click Configure under Syslog, and for Syslog Server, enter the IP address of the AccelOps virtual appliance that will receive the syslogs as the syslog server, enter 514 for Port, and set Max message length to 1024.
7. To make sure your changes take effect, go to System Configuration > Service Control, and click Restart ACS.

You can now configure AccelOps to communicate with your device by following the instructions in Setting Access Credentials for Device Discovery, and then initiate discovery of the device as described in the topics in Discovering Infrastructure. Settings for Access Credentials

Microsoft Internet Authentication Server (IAS) Configuration

What is Discovered and Monitored

Creating a Generic User Who Does Not Belong to the Local Administrator Group

Creating a User Who Belongs to the Domain Administrator Group Syslog

What is Discovered and Monitored

Protocol	Information Discovered	Metrics Collected	Used For
WMI
Syslog

Event Types

In CMDB > Event Types, search for “microsoft isa” in the Description column to see the event types associated with this device.

Rules

There are no predefined rules for this device.

Reports

There are no predefined reports for this device.

Configuration

WMI

Configuring WMI on your device so AccelOps can discover and monitor it requires you to create a user who has access to WMI objects on the device. There are two ways to do this:

Creating a Generic User Who Does Not Belong to the Local Administrator Group

Creating a User Who Belongs to the Domain Administrator Group

Creating a Generic User Who Does Not Belong to the Local Administrator Group

Log in to the machine you want to monitor with an administrator account.

Enable Remote WMI Requests by Adding a Monitoring Account to the Distributed COM Users Group and the Performance Monitor Users Group

1. Go to Start > Control Panel > Administrative Tools > Computer Management > Local Users and Groups.
2. Right-click Users and select Add User.
3. Create a user.
4. Go to Groups, right-click Distributed COM Users, and then click Add to group.
5. In the Distributed COM Users Properties dialog, click Add.
6. Find the user you created, and then click OK.

This is the account you will need to use in setting up the Performance Monitor Users group permissions.

7. Click OK in the Distributed COM Users Properties dialog, and then close the Computer Management dialog.
8. Repeat steps 4 through 7 for the Performance Monitor Users group. Enable DCOM Permissions for the Monitoring Account
9. Go to Start > Control Panel > Administrative Tools > Component Services.
10. Right-click My Computer, and then Properties.
11. Select the COM Security tab, and then under Access Permissions, click Edit Limits.
12. Make sure that the Distributed COM Users group and the Performance Monitor Users group have Local Access and Remote Access set to
13. Click OK.
14. Under Access Permissions, click EditDefault.
15. Make sure that the Distributed COM Users group and the Performance Monitor Users group have Local Access and Remote Access set to
16. Click
17. Under Launch and Activation Permissions, click Edit Limits.
18. Make sure that the Distributed COM Users group and the Performance Monitor Users group have the permissions Allow for Local Launch, Remote Launch, Local Activation, and Remote Activation.
19. Click OK.
20. Under Launch and Activation Permissions, click Edit Defaults.
21. Make sure that the Distributed COM Users group and the Performance Monitor Users group have the permissions Allow for Local Launch, Remote Launch, Local Activation, and Remote Activation.

See the sections on Enabling WMI Privileges and Allowing WMI Access through the Windows Firewall in the Domain Admin User set up instructions for the remaining steps to configure WMI.

Creating a User Who Belongs to the Domain Administrator Group

Log in to the Domain Controller with an administrator account.

Enable remote WMI requests by Adding a Monitoring Account to the Domain Administrators Group

1. Go to Start > Control Pane > Administrative Tools > Active Directory Users and Computers > Users.
2. Right-click Users and select Add User.
3. Create a user for the @accelops.com domain.

For example, YJTEST@accelops.com.

4. Go to Groups, right-click Administrators, and then click Add to Group.
5. In the Domain Admins Properties dialog, select the Members tab, and then click Add.
6. For Enter the object names to select, enter the user you created in step 3.
7. Click OK to close the Domain Admins Properties dialog.
8. Click OK.

Enable the Monitoring Account to Access the Monitored Device

Log in to the machine you want to monitor with an administrator account. Enable DCOM Permissions for the Monitoring Account

1. Go to Start > Control Panel > Administrative Tools > Component Services.
2. Right-click My Computer, and then select Properties.
3. Select the Com Security tab, and then under Access Permissions, click Edit Limits.
4. Find the user you created for the monitoring account, and make sure that user has the permission Allow for both Local Access and Re mote Access.
5. Click OK.
6. In the Com Security tab, under Access Permissions, click Edit Defaults.
7. Find the user you created for the monitoring account, and make sure that user has the permission Allow for both Local Access and Re mote Access.
8. Click OK.
9. In the Com Security tab, under Launch and Activation Permissions, click Edit Limits.
10. Find the user you created for the monitoring account, and make sure that user has the permission Allow for Local Launch, Remote Launch, Local Activation, and Remote Activation.
11. In the Com Security tab, under Launch and Activation Permissions, click Edit Defaults.
12. Find the user you created for the monitoring account, and make sure that user has the permission Allow for Local Launch, Remote Launch, Local Activation, and Remote Activation.

Enable Account Privileges in WMI

The monitoring account you created must have access to the namespace and sub-namespaces of the monitored device.

1. Go to Start > Control Panel > Administrative Tools > Computer Management > Services and Applications.
2. Select WMI Control, and then right-click and select Properties.
3. Select the Security
4. Expand the Root directory and select CIMV2.
5. Click Security.
6. Find the user you created for the monitoring account, and make sure that user has the permission Allow for Enable Account and Remot e Enable.
7. Click Advanced.
8. Select the user you created for the monitoring account, and then click Edit.
9. In the Apply onto menu, select This namespace and subnamespaces.
10. Click OK to close the Permission Entry for CIMV2 dialog.
11. Click OK to close the Advanced Security Settings for CIMV2 dialog.
12. In the left-hand navigation, under Services and Applications, select Services.
13. Select Windows Management Instrumentation, and then click Restart. Allow WMI to Connect Through the Windows Firewall (Windows 2003)
14. In the Start menu, select Run.
15. Run msc.
16. Go to Local Computer Policy > Computer Configuration > Administrative Templates > Network > Network Connections > Windows Firewall.
17. Select Domain Profile or Standard Profile depending on whether the device you want to monitor is in the domain or not.
18. Select Windows Firewall: Allow remote administration exception.
19. Run exe and enter these commands:
20. Restart the server.

Allow WMI through Windows Firewall (Windows Server 2008, 2012)

1. Go to Control Panel > Windows Firewall.
2. In the left-hand navigation, click Allow a program or feature through Windows Firewall.
3. Select Windows Management Instrumentation, and the click OK.

You can now configure AccelOps to communicate with your device by following the instructions in Setting Access Credentials for Device Discovery, and then initiate discovery of the device as described in the topics in Discovering Infrastructure.

Syslog

You need to configure your Microsoft Internet Authentication Server to save logs, and then you can use the Windows Agent Manager to configure the type of log information you want sent to AccelOps.

1. Log in to your server as an administrator.
2. Go to Start > Administrative Tools > Internet Authentication Service.
3. In the left-hand navigation, select Remote Access Logging, then select Local File.
4. Right-click on Local File to open the Properties menu, and then select Log File.
5. For Directory, enter C:\WINDOWS\system32\LogFiles\IAS.
6. Click OK.

You can now use Windows Agent Manager to configure what information will be sent to AccelOps.

 

Juniper Networks Steel-Belted RADIUS Configuration

What is Discovered and Monitored

Protocol	Information discovered	Metrics collected	Used for
SNMP	Application type	Process level CPU utilization, Memory utilization	Performance Monitoring
WMI	Application type, service mappings	Process level metrics: uptime, CPU Utilization, Memory utilization, Read I/O, Write I/O	Performance Monitoring
Syslog	Application type	Successful and Failed Authentications, Successful and Failed administrative logons, RADIUS accounting logs	Security Monitoring and compliance

Event Types

In CMDB > Event Types, search for “Juniper Steel-Belted RADIUS” in the Device Type column to see the event types associated with this device.

Rules

There are no predefined rules for this device.

Reports

There are no predefined reports for this device.

Configuration

SNMP

AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.

Syslog

1. Login as administrator
2. Install and configure Epilog application to convert log files written by Steelbelted RADIUS server into syslogs for sending to AccelOps
   1. Download Epilog from Epilog download site and install it on your Windows Server.
   2. Launch Epilog from StartAll ProgramsInterSect AllianceEpilog for windows

 

1. Configure Epilog application as follows
   1. Select Log Configuration on left hand panel, click Add button to add log files whose content needs to be sent to AccelOps. These log files are written by the Steelbelted RADIUS server and their paths are correct. Also make sure the Log Type is SteelbeltedLog.

 

1. Select Network Configuration on left hand panel. On the right, set the destination address to that of AccelOps server, port to 514 and make sure that syslog header is enabled. Then click Change Configuration button.

 

• Click the “Apply the latest audit configuration” link on the left hand side to apply the changes to Epilog applications. DHCP logs will now sent to AccelOps in real time.

Vasco DigiPass Configuration

What is Discovered and Monitored

Protocol	Information discovered	Metrics collected	Used for
Syslog		Successful and Failed Authentications, Successful and Failed administrative logons	Security Monitoring and compliance

Event Types

In CMDB > Event Types, search for “Vasco DigiPass” in the Device Type column to see the event types associated with this device. Some important ones are

Vasco-DigiPass-KeyServer-AdminLogon-Success

Vasco-DigiPass-KeyServer-UserAuth-Success

Vasco-DigiPass-KeyServer-UserAuth-Failed

Vasco-DigiPass-KeyServer-AccountLocked

Vasco-DigiPass-KeyServer-AccountUnlocked

Rules

There are no predefined rules for this device.

Reports

There are no predefined reports for this device.

Configuration

Configure the Vasco DigiPass management Console to send syslog to AccelOps. AccelOps is going to parse the logs automatically. Make sure the syslog format is as follows.

May 16 18:21:50 vascoservername ikeyserver[3575]: {Success}, {Administration}, {S-001003}, {A command of type [User] [Unlock] was successful.}, {0xA46B6230BA60B240CE48011B0C30D393}, {Source Location:10.1.2.3}, {Client Location:10.1.2.3}, {User ID:flast}, {Domain:company.com}, {Input Details: {User ID : flast} {Domain Name : company.com}}, {Output Details: {User ID : flast} {Password : ********} {Created Time : 2013/05/13 19:06:52} {Modified Time : 2013/05/16 18:21:49} {Has Digipass : Unassigned} {Status : 0} {Domain Name : company.com} {Local Authentication : Default} {Back-end Authentication : Default} {Disabled : no} {Lock Count : 0} {Locked : no} {Last Password Set Time : 2013/05/13 19:06:52} {Static Password History : d0NdVMhSdvdNEQJkkKTWmiq8iB4K1dWreMf5FQlZM7U=} {Key ID : SSMINSTALLSENSITIVEKEY}}, {Object:User}, {Command:Unlock}, {Client

Type:Administration Program}

May 15 20:27:35 vascoservername ikeyserver[3575]: {Success},

{Administration}, {S-004001}, {An administrative logon was successful.},

{0x25AB20F3222F554A96CFFD2886AE4C71}, {Source Location:10.1.2.3},

{Client Location:10.1.2.3}, {User ID:admin}, {Domain:company.com},

{Client Type:Administration Program}

May 17 18:43:22 vascoservername ikeyserver[3582]: {Info}, {Initialization}, {I-002010}, {The SOAP protocol handler has been initialized successfully.}, {0x0E736D24D54E717E6F5DA6C09E89F8EE}, {Version:3.4.7.115}, {Configuration Details:IP-Address: 10.1.2.3, IP-Port: 8888, Supported-Cipher-Suite: HIGH, Server-Certificate:

/var/identikey/conf/certs/soap-custom.pem, Private-Key-Password:

********, CA-Certificate-Store:

/var/identikey/conf/certs/soap-ca-certificate-store.pem,

Client-Authentication-Method: none, Reverify-Client-On-Reconnect: False,

DPX-Upload-Location: /var/dpx/}

Redhat JBOSS Configuration

What is Discovered and Monitored

Event Types

Rules

Reports

Configuration

JMX

Configuring JMX on the JBOSS Application Server

Configuring AccelOps to Use the JMX Protocol with JBOSS Application Server

Settings for Access Credentials

Sample Event for JBOSS Metrics

What is Discovered and Monitored

Protocol	Information discovered	Metrics collected	Used for
JMX		Generic information: Application version, Application port Availability metrics: Uptime, Application Server State CPU metrics: Application server instance, CPU utilization Memory metrics: Heap utilization, Heap used memory, Heap free memory, Heap max memory,  Heap commit memory, Max System dumps on disk, Max heap dumps on disk Servlet metrics: Application name, Web application name, Servlet Name, Invocation count, Request errors Database pool metrics: Application server instance, JDBC provider, Data source, Pool size, Closed connections, Active Connections, Requests wait for connections, Connection use time, Connection factory type, Peak connections Thread pool metrics: Application server instance, Thread pool name, Execute threads, Peak execute threads Application level metrics: Application name, Web application name, Application server instance, Web application context root, Active sessions, Peak active sessions EJB metrics: Application name, Application server instance, EJB component name	Performance Monitoring

Event Types

In CMDB > Event Types, search for “boss” in the Description column to see the event types associated with this device.

Rules

There are no predefined rules for this device.

Reports

In Analytics > Reports, search for jobs” in the Name column to see the reports associated with this application or device. Configuration

JMX

 

1. Enable authentication security check. Open the file ${JBoss_Home}\server\default\deploy\jmx-jboss-beans.xml, find the J MXConnector bean, and uncomment the securityDomain
2. Modify the file ${JBoss_Home}\server\default\conf\props\jmx-console-roles.properties to configure the JMX administrator role.
3. Modify the file ${JBoss_Home}\server\default\conf\props\jmx-console-users.properties to configure the username and password for JMX.
4. Configure DNS resolution for the JBOSS application server in your AccelOps Supervsior, Workers, and Collectors by adding the IP address and DNS name of the JBOSS application server to their /etc/hosts If DNS is already configured to resolve the JBOSS application server name, you can skip this step.
5. Start JBoss.

Configuring AccelOps to Use the JMX Protocol with JBOSS Application Server

To configure JMX communications between your JBOSS application server and AccelOps, you need to copy several files from your application server to the JBOSS configuration directory for each AccelOps virtual appliance that will be used for discovery and performance monitoring jobs. AccelOps does not include these files because of licensing restrictions.

JBOSS Version	Files to Copy
4.x, 5.x, 6.x	Copy ${JBoss_Home}/lib/jboss-bootstrap-api.jar  to /opt/phoenix/config/JBoss/
7.0	No copying is necessary
7.1	Copy ${JBoss_Home}/bin/client/jboss-client.jar  to /opt/phoenix/config/JBoss/

You can now configure AccelOps to communicate with your device by following the instructions in Setting Access Credentials for Device Discovery, and then initiate discovery of the device as described in the topics in Discovering Infrastructure.

<134>Feb 06 11:38:35 10.1.2.16 java: [PH_DEV_MON_JBOSS_CPU]:[eventSeverity]=PHL_INFO,[destIpAddr]=10.1.2.16,[ hostIpAddr]=10.1.2.16,[hostName]=SH-WIN08R2-JMX,[destDevPort]=1090,[appV ersion]=6.1.0.Final “Neo”,[appServerState]=STARTED,[sysUpTime]=6202359,[cpuUtil]=2

<134>Feb 06 11:38:36 10.1.2.16 java:

[PH_DEV_MON_JBOSS_MEMORY]:[eventSeverity]=PHL_INFO,[destIpAddr]=10.1.2.1 6,[hostIpAddr]=10.1.2.16,[hostName]=SH-WIN08R2-JMX,[destDevPort]=1090,[a ppVersion]=6.1.0.Final “Neo”,[appServerState]=STARTED,[freeMemKB]=264776,[freeSwapMemKB]=142786

4,[memTotalMB]=4095,[memUtil]=94,[swapMemUtil]=83,[swapMemTotalMB]=8189, [virtMemCommitKB]=1167176,[heapUsedKB]=188629,[heapMaxKB]=466048,[heapCo mmitKB]=283840,[heapUtil]=66,[nonHeapUsedKB]=106751,[nonHeapMaxKB]=31129 6,[nonHeapCommitKB]=107264,[nonHeapUtil]=99 <134>Feb 06 11:38:36 10.1.2.16 java: [PH_DEV_MON_JBOSS_APP]:[eventSeverity]=PHL_INFO,[destIpAddr]=10.1.2.16,[ hostIpAddr]=10.1.2.16,[hostName]=SH-WIN08R2-JMX,[destDevPort]=1090,[appV ersion]=6.1.0.Final “Neo”,[webContextRoot]=//localhost/,[webAppState]=RUNNING,[cacheMaxSize]

=10240,[cacheTTL]=5000,[reqProcessTimeAvg]=10472,[startTime]=1353919592, [cookiesAllowed]=true,[cachingAllowed]=true,[linkingAllowed]=false,[cros sContextAllowed]=true

<134>Feb 06 11:38:36 10.1.2.16 java:

[PH_DEV_MON_JBOSS_SERVLET]:[eventSeverity]=PHL_INFO,[destIpAddr]=10.1.2. 16,[hostIpAddr]=10.1.2.16,[hostName]=SH-WIN08R2-JMX,[destDevPort]=1090,[ appVersion]=6.1.0.Final “Neo”,[webAppName]=//localhost/admin-console,[servletName]=Faces

Servlet,[totalRequests]=6,[reqErrors]=0,[loadTime]=0,[reqProcessTimeAvg]

=10610

<134>Feb 06 11:38:36 10.1.2.16 java:

[PH_DEV_MON_JBOSS_DB_POOL]:[eventSeverity]=PHL_INFO,[destIpAddr]=10.1.2. 16,[hostIpAddr]=10.1.2.16,[hostName]=SH-WIN08R2-JMX,[destDevPort]=1090,[ appVersion]=6.1.0.Final “Neo”,[dataSource]=DefaultDS,[dataSourceState]=Started

<134>Feb 06 11:38:36 10.1.2.16 java: [PH_DEV_MON_JBOSS_REQUEST_PROCESSOR]:[eventSeverity]=PHL_INFO,[destIpAdd r]=10.1.2.16,[hostIpAddr]=10.1.2.16,[hostName]=SH-WIN08R2-JMX,[destDevPo rt]=1090,[appVersion]=6.1.0.Final “Neo”,[reqProcessorName]=ajp-0.0.0.0-8009,[recvBytes]=0,[sentBytes]=0,[r eqProcessTimeAvg]=0,[reqProcessTimeMax]=0,[totalRequests]=0,[reqRate]=0, [reqErrors]=0

<134>Feb 06 11:38:36 10.1.2.16 java: [PH_DEV_MON_JBOSS_EJB]:[eventSeverity]=PHL_INFO,[destIpAddr]=10.1.2.16,[ hostIpAddr]=10.1.2.16,[hostName]=SH-WIN08R2-JMX,[destDevPort]=1090,[appV ersion]=6.1.0.Final “Neo”,[ejbComponentName]=ejbjar.jar,[ejbBeanName]=HelloWorldBeanRemote,[ ejbAvailCount]=0,[ejbCreateCount]=0,[ejbCurrCount]=0,[ejbMaxCount]=0,[ej bRemovedCount]=0,[ejbInstanceCacheCount]=null,[ejbPassivations]=null,[ej bTotalInstanceCount]=null

<134>Feb 06 11:38:36 10.1.2.16 java:

[PH_DEV_MON_JBOSS_THREAD_POOL]:[eventSeverity]=PHL_INFO,[destIpAddr]=10.

1.2.16,[hostIpAddr]=10.1.2.16,[hostName]=SH-WIN08R2-JMX,[destDevPort]=10

90,[appVersion]=6.1.0.Final