FortiSIEM VM Memory Monitoring

Leave a reply

VM Memory Monitoring

cpuReadyPct double
phyCpuUtil double
cpuRunPct double
Poll Interval pollIntv uint32 Polling interval in seconds

Event Type: PH_DEV_MON_VM_MEM_UTIL

Description: Event containing VM Memory utilization metrics Source: All Key Attributes:

Name Id Type Description
Event Type eventType string Event type set to PH_DEV_MON_SYS_PING_STAT
Event

Severity

 eventSeverity uint16 Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event

Severity

Category

 eventSeverityCat string Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event

Receive

Time

 phRecvTime Date Time at which AccelOps generated this event
Reporting

IP

 reptDevIpAddr Date IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP relayDevIpAddr Date IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event

Log

 rawEventMsg string Raw event containing all attributes in comma separated “[Attribute] = value” format.
vmName
Host name hostName string Host name (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Host IP

Address

 hostIpAddr IP Access IP (as in AccelOps CMDB) of the device whose CPU utilization is being reported
phyMachName
phyMachIpAddr
phyMemUtil
actvMemPct
swapReadKBytesPerSec
swapWriteKBytesPerSec
Poll Interval pollIntv uint32 Polling interval in seconds

FortiSIEM VM Per CPU Monitoring Event

Leave a reply

VM Per CPU Monitoring Event

cpuReadyPct
phyCpuUtil
cpuSysPct
Packet Loss

Pct

 pktLossPct double Packet loss percentage from the ping tests done during this interval
Poll Interval pollIntv uint32 Polling interval in seconds

Event Type: PH_DEV_MON_VM_PER_CPU_UTIL

Description: Event containing VM per CPU metrics Source: All Key Attributes:

Name Id Type Description
Event Type eventType string Event type set to PH_DEV_MON_SYS_PING_STAT
Event

Severity

 eventSeverity uint16 Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event

Severity

Category

 eventSeverityCat string Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event

Receive

Time

 phRecvTime Date Time at which AccelOps generated this event
Reporting IP reptDevIpAddr Date IP address of device reporting this event. In this case set to the device reporting the utilization (same as

Host name attribute)
Relaying IP relayDevIpAddr Date IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event

Log

 rawEventMsg string Raw event containing all attributes in comma separated “[Attribute] = value” format.
vmName
Host name hostName string Host name (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Host IP

Address

 hostIpAddr IP Access IP (as in AccelOps CMDB) of the device whose CPU utilization is being reported
phyMachName
phyMachIpAddr
cpuName uint32 Average Round trip time from the ping tests done during this interval
cpuSysPct uint32
cpuUtil uint32

FortiSIEM VM CPU Monitoring Event

Leave a reply

VM CPU Monitoring Event

Event Type: PH_DEV_MON_VM_CPU_UTIL

Description: Event containing VM CPU metrics Source: All Key Attributes:

Name Id Type Description
Event Type eventType string Event type set to PH_DEV_MON_SYS_PING_STAT
Event

Severity

 eventSeverity uint16 Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event

Severity

Category

 eventSeverityCat string Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event

Receive

Time

 phRecvTime Date Time at which AccelOps generated this event
Reporting IP reptDevIpAddr Date IP address of device reporting this event. In this case set to the device reporting the utilization (same as

Host name attribute)
Relaying IP relayDevIpAddr Date IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event

Log

 rawEventMsg string Raw event containing all attributes in comma separated “[Attribute] = value” format.
vmName
Host name hostName string Host name (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Host IP

Address

 hostIpAddr IP Access IP (as in AccelOps CMDB) of the device whose CPU utilization is being reported
phyMachName
phyMachIpAddr
Avg Round

Trip Time

 processors uint32 Average Round trip time from the ping tests done during this interval
Max Round

Trip Time

 vCpus uint32 Max Round trip time from the ping tests done during this interval
Min Round

Trip Time

 cpuUtil uint32 Min Round trip time from the ping tests done during this interval
cpuRunPct
cpuMlmtedPct

 

FortiSIEM VMware Monitoring Events

Leave a reply
VMware Monitoring Events

AccelOps generates the following events VMware related system monitoring events

VM level events

VM State Monitoring

VM Uptime Monitoring

VM CPU Monitoring

VM Per CPU Monitoring

VM Memory Monitoring

VM Datastore Utilization Monitoring

VM Disk I/O Monitoring

VM Datastore I/O Monitoring

VM Network I/O Monitoring

Disk Growth Trend – Daily

Disk Growth Trend – Weekly

Disk Growth Trend – Monthly

ESX level events

Name Id Type Description
Event Type eventType string Event type set to PH_DEV_MON_SYS_PING_STAT
Event

Severity

 eventSeverity uint16 Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event

Severity

Category

 eventSeverityCat string Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event

Receive

Time

 phRecvTime Date Time at which AccelOps generated this event
Reporting

IP

 reptDevIpAddr Date IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP relayDevIpAddr Date IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event

Log

 rawEventMsg string Raw event containing all attributes in comma separated “[Attribute] = value” format.
VM Name vmName
Host name hostName string Host name (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Host IP

Address

 hostIpAddr IP Access IP (as in AccelOps CMDB) of the device whose CPU utilization is being reported

ESX State Monitoring

ESX CPU Monitoring

ESX Memory Monitoring

ESX Datastore Utilization Monitoring

ESX Disk I/O Monitoring

ESX Datastore I/O Monitoring

Cluster and resource pool events

VM Cluster CPU Utilization

VM Cluster Memory Utilization

VM Cluster Datastore I/O Utilization

VM Resource pool CPU Utilization

VM Resource pool Memory Utilization

VM State Monitoring

Event Type: PH_DEV_MON_VM_STATE

Description: Event containing VM State Source: All Key Attributes:

Physical

Machine

Name

 phyMachName string
Physical machine IP phyMachIpAddr IP
vmPowerState string
vmPowerStateCode uint32
vmConnectionState string
vmConnectionStateCode uint32
status string
Poll Interval pollIntv uint32 Poll interval in seconds

 

Name Id Type Description
Event Type eventType string Event type set to PH_DEV_MON_SYS_PING_STAT
Event

Severity

 eventSeverity uint16 Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event

Severity

Category

 eventSeverityCat string Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event

Receive

Time

 phRecvTime Date Time at which AccelOps generated this event
Reporting IP reptDevIpAddr Date IP address of device reporting this event. In this case set to the device reporting the utilization (same as

Host name attribute)
Relaying IP relayDevIpAddr Date IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event

Log

 rawEventMsg string Raw event containing all attributes in comma separated “[Attribute] = value” format.
vmName
Host name hostName string Host name (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Host IP

Address

 hostIpAddr IP Access IP (as in AccelOps CMDB) of the device whose CPU utilization is being reported
phyMachName

 

VM Uptime Monitoring

Event Type: PH_DEV_MON_VM_UPTIME

Description: Event containing VM Uptime Source: All Key Attributes:

phyMachIpAddr
sysUpTime
sysDownTime
Poll Interval pollIntv uint32 Polling interval in seconds

FortiSIEM Hardware Monitoring Events

Leave a reply
Hardware Monitoring Events

AccelOps generates the following events related to hardware monitoring

Overall Hardware Status

Individual Hardware Component Status

Temperature Measurement

Humidity Measurement

Dew point Measurement

Air flow Measurement

Audio Measurement

Ampere Measurement

Dry Contact Measurement

Camera Motion Measurement

Power Supply Measurement

Chassis Component Measurement

Overall Hardware Status Event

This event is generated by AccelOps as a overall hardware status. Sometimes this overall status is provided the device. In other times, AccelOps derives the overall health from that of the individual hardware components.

Event Type: PH_DEV_MON_HW_STAT

Description: Event containing overall hardware status as detected by AccelOps

Cisco IOS (SNMP),Cisco Nx-OS (SNMP), Juniper JunOS (SNMP), Juniper SRX JunOS (SNMP), Alcatel TiMOS (SNMP), Alcatel

AOS (SNMP),Avaya/Nortel ERS (SNMP), Huawei VRP (SNMP), H3C Comware,

EMC Clariion (NavisecCli), NetApp DataONTAP Filer (SNMP), Dell EqualLogic (SNMP)

F5 Big-IPOS (SNMP), Riverbed Steelhead (SNMP), InfoBlox NiOS (SNMP)

Virtual Machines on VMWare ESX (VMSDK), Windows/Linux Servers on Dell hardware with OpenManage installed (SNMP),

Windows/Linux Servers on HP hardware with HP Insight Manager installed (SNMP),

APC NetBotz (SNMP)

Cisco UPS (UCS API)

HP BladeSystem (SNMP)

Key Attributes: Varies depending on the source. The global set of attributes is shown below

Name Id Type Description
Event Type eventType string Event type set to PH_DEV_MON_HW_STAT
Event Severity eventSeverity uint16 0 if the event attribute hwStatusCode is 0 (Normal), 5  if hwStatusCode is 1 (Warning) and 10  if hwStatusCode is 2 (Critical)
Event Severity

Category

 eventSeverityCat string Set to Low. In general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to

Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive

Time

 phRecvTime Date Time at which AccelOps generated this event
Reporting IP reptDevIpAddr Date IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP relayDevIpAddr Date IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event Log rawEventMsg string Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name hostName string Host name (as in AccelOps CMDB) of the device whose overall hardware health is being reported
Host IP Address hostIpAddr IP Access IP (as in AccelOps CMDB) of the device whose overall hardware health is being reported
Hardware Status hwStatusCode uint16 Overall hardware status: 0 for Normal, 1 for Warning and 2 for Critical
Hardware Power

Supply Status

 hwPowerSupplyStatus uint16 Overall hardware status: 0 for Normal, 1 for Warning and 2 for Critical
Hardware

Battery Status

 hwBatteryStatus uint16 Battery status: 0 for Normal, 1 for Warning and 2 for Critical
Hardware Disk

Status

 hwDiskStatus uint16 Disk status: 0 for Normal, 1 for Warning and 2 for Critical
Hardware RAID

Status

 hwRaidStatus uint16 Hardware RAID status: 0 for Normal, 1 for Warning and 2 for Critical
Hot Spare Disk

Count

 hwHotSpareDiskCount uint16 Number of hot spare disks
Hardware

Memory Status

 hwMemoryStatus uint16 Memory status: 0 for Normal, 1 for Warning and 2 for Critical
Hardware Status hwPowerSupplyStatus uint16 Power supply status: 0 for Normal, 1 for Warning and 2 for Critical
Failed Power

Supply Count

 hwFailedPowerSupplyCount uint16 Number of failed power supplies
Hardware Temp

Sensor Status

 hwTempSensorStatus uint16 Temperature sensor status: 0 for Normal, 1 for Warning and 2 for Critical
Hardware Status hwFanStatus uint16 Fan status: 0 for Normal, 1 for Warning and 2 for Critical
Failed Fan

Count

 hwFailedFanCount uint16 Failed fan count
Hardware Amp

Status

 hwAmpStatus uint16 Current (Amp) status: 0 for Normal, 1 for Warning and 2 for Critical
Hardware

Voltage Status

 hwVoltageStatus uint16 Voltage status: 0 for Normal, 1 for Warning and 2 for Critical
Storage LCC

Status

 hwLCCStatus uint16 Hardware LCC status: 0 for Normal, 1 for Warning and 2 for Critical
Storage Link

Status

 hwLinkStatus uint16 Hardware link status: 0 for Normal, 1 for Warning and 2 for Critical
Storage Port

Status

 hwPortStatus uint16 Hardware port status: 0 for Normal, 1 for Warning and 2 for Critical
Relative

Humidity Status

 hwRelHumidStatus uint16 Relative humidity status: 0 for Normal, 1 for Warning and 2 for Critical
Dew Point

Status

 hwDewPtStatus uint16 Dew Point status: 0 for Normal, 1 for Warning and 2 for Critical
Audio Status hwAudioStatus uint16 Audio status: 0 for Normal, 1 for Warning and 2 for Critical
Air Flow Status hwAirFlowStatus uint16 AIr flow status: 0 for Normal, 1 for Warning and 2 for Critical
Generic

Numeric Sensor

Status

 hwGenNumericSensorStatus uint16 Generic Numeric sensor status: 0 for Normal, 1 for Warning and 2 for Critical
Dry Contact

Status

 hwDryContactStatus uint16 Dry Contact status: 0 for Normal, 1 for Warning and 2 for Critical
Door Switch

Status

 hwDoorSwitchStatus uint16 Door switch status: 0 for Normal, 1 for Warning and 2 for Critical
Camera Motion

Status

 hwCameraMotionStatus uint16 Camera motion status: 0 for Normal, 1 for Warning and 2 for Critical
Generic State

Sensor Status

 hwGenStateSensorStatus uint16 Generic state sensor status: 0 for Normal, 1 for Warning and 2 for Critical

The following table indicates sources of various hardware status events.

Device

Type

(Method)

 Overall Temp Power

Supply

 Fan Chassis Memory Disk RAID Battery Amp Voltage LCC Storage

Link

 Storage

Port

 Humidity Air flow Dew

Point

 Audio Gen

Numeric

Sensor

 Dry

Contact

 Door

Swit
Cisco IOS

(SNMP)

 x x x x
Cisco Nx-OS

(SNMP)

 x x
Juniper

JunOS

(SNMP),

 x x x x
Juniper SRX

JunOS

(SNMP)

 x x x x
Alcatel TiMOS

(SNMP)

 x x x x
Alcatel AOS

(SNMP)

 x x
Huawei VRP

(SNMP)
H3C

Comware

(SNMP)

 x x
EMC Clariion

(NavisecCli)

 x x x x x x x

c

NetApp

DataONTAP

Filer (SNMP)

 x x x x x x x x x
Dell

EqualLogic

(SNMP)

 x x x x x x
F5 Big-IPOS

(SNMP)

 x x x
Riverbed

Steelhead

(SNMP)

 x
InfoBlox NiOS

(SNMP)

 x x x x x x

 
VMs on ESX

(VMSDK)
Dell Servers x x x x x x x x x
HP Servers x x x x x x x x x
APC NetBotz x x x x x x x x x
Cisco UCS
HP

BladeSystem

 x x x
Pages: 1 2 3

FortiSIEM Availability Monitoring Events

Leave a reply
Availability Monitoring Events

Availability Monitoring Events

AccelOps generates the following events related to availability monitoring

Ping Stat Monitoring

Synthetic Monitoring Success Synthetic Monitoring Failure

Name Id Type Description
Event Type eventType string Event type set to PH_DEV_MON_SYS_PING_STAT
Event

Severity

 eventSeverity uint16 Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event

Severity

Category

 eventSeverityCat string Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to

Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event

Receive

Time

 phRecvTime Date Time at which AccelOps generated this event
Reporting IP reptDevIpAddr Date IP address of device reporting this event. In this case set to the device reporting the utilization (same as

Host name attribute)
Relaying IP relayDevIpAddr Date IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event

Log

 rawEventMsg string Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name hostName string Host name (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Host IP

Address

 hostIpAddr IP Access IP (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Avg Round

Trip Time

 avgDurationMSec uint32 Average Round trip time from the ping tests done during this interval
Max Round

Trip Time

 maxDurationMSec uint32 Max Round trip time from the ping tests done during this interval
Min Round

Trip Time

 minDurationMSec uint32 Min Round trip time from the ping tests done during this interval
Packet Loss

Pct

 pktLossPct double Packet loss percentage from the ping tests done during this interval
System

Down Time

 sysDownTime uint32 Amount of time during this polling interval that there was 100% ping loss
System

Degraded

Time

 sysDegradedTime uint32 Amount of time during this polling interval that there was 50%+ ping loss
Poll Interval pollIntv uint32 Polling interval in seconds

Synthetic Transaction Monitoring Success

Event Type: PH_DEV_MON_EUM_SUCCESS

Description: Successful Synthetic transaction monitoring test Source: All Key Attributes:

Name Id Type Description
Event Type eventType string Event type set to PH_DEV_MON_SYS_EUM_SUCCESS
Event Severity eventSeverity uint16 Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event Severity

Category

 eventSeverityCat string Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive

Time

 phRecvTime Date Time at which AccelOps generated this event
Reporting IP reptDevIpAddr Date IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP relayDevIpAddr Date IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event Log rawEventMsg string Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name hostName string Host name (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Host IP Address hostIpAddr IP Access IP (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Synthetic

Transaction

Monitor Name

 endUserMonitorName string Name of the Synthetic Transaction Monitor
Synthetic

Transaction

Monitor Step

 endUserMonitorStep string Particular step of the Synthetic Transaction Monitor, in case the transaction monitor involves multiple steps.
Application

Protocol

 appTransportProto string Application protocol such as HTTP
Application Port appPort string Port number such as 443
Application

Response Time

 appResponseTimeMSec uint32 Synthetic transaction response time (ms)
Poll Interval pollIntv uint32 Polling interval in seconds

Synthetic Transaction Monitoring Failure

Event Type: PH_DEV_MON_EUM_FAIL

Description: Failed Synthetic transaction monitoring test Source: All Key Attributes:

Name Id Type Description
Event Type eventType string Event type set to PH_DEV_MON_SYS_EUM_SUCCESS
Event Severity eventSeverity uint16 Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event Severity

Category

 eventSeverityCat string Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive

Time

 phRecvTime Date Time at which AccelOps generated this event
Reporting IP reptDevIpAddr Date IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)

 

Relaying IP relayDevIpAddr Date IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event Log rawEventMsg string Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name hostName string Host name (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Host IP Address hostIpAddr IP Access IP (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Synthetic

Transaction

Monitor Name

 endUserMonitorName string Name of the Synthetic Transaction Monitor test
Synthetic

Transaction

Monitor Step

 endUserMonitorStep string Particular step of the Synthetic Transaction Monitor, in case the transaction monitor involves multiple steps.
Application

Protocol

 appTransportProto string Application protocol such as HTTP
Application Port appPort string Port number such as 443
Reason for Error errReason uint32 Reason for failed Synthetic Transaction Monitor test
Poll Interval pollIntv uint32 Polling interval in seconds

 

 

FortiSIEM Disk Growth Trend – Monthly

Leave a reply

Disk Growth Trend – Monthly

Event Type: PH_DEV_MON_SYS_DISK_TREND_MONTH

Disk Capacity

Util

 diskUtil double Disk utilization for a specific disk name (between 0-100).
Free Disk (MB) freeDiskMB uint32 Size of free disk available in MBytes
Total Disk (MB) totalDiskMB uint32 Size of total disk in MBytes
Used Disk (MB) usedDiskMB uint32 Size of used disk in MBytes
Current Week

Disk Growth

(MB)

 diskGrowthMBWeekly double Disk growth (MB) for the current week
Avg Weekly

Disk Growth

(MB)

 avgDiskGrowthMBWeekly double Running avg of weekly disk growth (MB) overall previous days
Days To Disk

Full

 timeToDiskFull uint32 Number of days until disk is full (from weekly growth statistics)
Poll Interval pollIntv uint32 Polling interval in seconds.

Description: Event containing disk usage growth trend – monthly view Source:

Microsoft Windows (SNMP or WMI), Linux (SNMP), Solaris (SNMP), HP-UX (SNMP), IBM AIX (SNMP) NetApp DataONTAP (SNMP)

Key Attributes:

Name Id Type Description
Event Type eventType string Event type set to PH_DEV_MON_SYS_DISK_TREND_DAY
Event Severity eventSeverity uint16 Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event Severity

Category

 eventSeverityCat string Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive

Time

 phRecvTime Date Time at which AccelOps generated this event
Reporting IP reptDevIpAddr Date IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP relayDevIpAddr Date IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event Log rawEventMsg string Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name hostName string Host name (as in AccelOps CMDB) of the device whose disk utilization is being reported
Host IP Address hostIpAddr IP Access IP (as in AccelOps CMDB) of the device whose disk utilization is being reported
Disk Name diskName string Disk name
Disk Capacity

Util

 diskUtil double Disk utilization for a specific disk name (between 0-100).
Free Disk (MB) freeDiskMB uint32 Size of free disk available in MBytes
Total Disk (MB) totalDiskMB uint32 Size of total disk in MBytes
Used Disk (MB) usedDiskMB uint32 Size of used disk in MBytes
Current Monthly

Disk Growth

(MB)

 diskGrowthMBMonthly double Disk growth (MB) for the current month
Avg Monthly

Disk Growth

(MB)

 avgDiskGrowthMBMonthly double Running avg of monthly disk growth (MB) overall previous months
Days To Disk

Full

 timeToDiskFull uint32 Number of days until disk is full (from monthly growth statistics)
Poll Interval pollIntv uint32 Polling interval in seconds.

 

FortiSIEM Disk Growth Trend – Weekly

Leave a reply

Disk Growth Trend – Weekly

Event Type: PH_DEV_MON_SYS_DISK_TREND_WEEK

Description: Event containing disk usage growth trend – weekly view Source:

Microsoft Windows (SNMP or WMI), Linux (SNMP), Solaris (SNMP), HP-UX (SNMP), IBM AIX (SNMP) NetApp DataONTAP (SNMP)

Key Attributes:

Name Id Type Description
Event Type eventType string Event type set to PH_DEV_MON_SYS_DISK_TREND_DAY
Event Severity eventSeverity uint16 Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event Severity

Category

 eventSeverityCat string Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive

Time

 phRecvTime Date Time at which AccelOps generated this event
Reporting IP reptDevIpAddr Date IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP relayDevIpAddr Date IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event Log rawEventMsg string Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name hostName string Host name (as in AccelOps CMDB) of the device whose disk utilization is being reported
Host IP

Address

 hostIpAddr IP Access IP (as in AccelOps CMDB) of the device whose disk utilization is being reported
Disk Name diskName string Disk name