What is Network Manager?

Network Manager is a Fortinet product that manages multiple controllers.

ESS, Security, VLAN, GRE and RADIUS profiles can all be configured either from Network Manager or from the controller. You can tell where a profile was configured by checking the read-only field Owner; the Owner is either NMS or controller. If a profile belongs to Network Manager, you cannot alter or delete it from a controller.

If a profile belongs to Network Manager, the recommendation is to alter/delete it from the Network Manager interface. If for some reason Network Manager is not reachable from the con What is Network Manager?

troller, then the recommendation is to unregister the Network Manager server from the controller using the nms-server unregister CLI command.

Web UI Concepts

Access FortiWLC (SD) by entering the IP address of the controller in a browser (see “Browsers” on page 46 below). The Web UI interface that displays operates from four menus: Monitor, Maintenance, Configuration, and Wizards. Clicking any entry from the list expands it to display the options contained therein.

Figure 1: Menu Options in the WebUI

How Does the GUI Relate to CLI Commands?

Most FortiWLC (SD) tasks can be accomplished using either the CLI or the GUI. Some commands can only be done with one or the other. The chart below gives some examples of this. You can refer to the illustration on the previous page or click the indicated links on the UI Interface.

How Does the GUI Relate to CLI Commands?                                                                                                                        43

How Does the GUI Relate to CLI Commands?

How Does the GUI Relate to CLI Commands?

Browsers

WebUI

• Internet Explorer 9,10 (Vista and Win XP)
• Mozilla Firefox 25+ (Vista and Win XP)
• Google Chrome 31+

Captive Portal

• Internet Explorer 6, 7, 8,9, and 10
• Apple Safari
• Google Chrome
• Mozilla Firefox 4.x and earlier
• Mobile devices (such as Apple iPhone and BlackBerry)

Internet Explorer Caching Settings

Be sure to turn off caching on any computer using Internet Explorer, because dashboard updates are frequently ignored with caching on. To configure Windows Internet Explorer, follow these steps:

1. Access Internet Options by opening an Internet Explorer window and then clicking Tools > Internet Options.
   • window like this one displays:

Browsers

Figure 2: Internet Options for Microsoft Windows

2. Under Browsing history, click Settings.
   • window like this one displays:

Browsers

Figure 3: Website Data Settings

3. Select the option Every time I visit the web page.
4. Click OK.

The dashboard will now be updated every time the statistics change.

Note that no configuration is needed for Mozilla Firefox.

Ending a Session

To end a session, use the following command in either User or privileged EXEC mode:

controller> exit

Manipulating Terminal Characteristics

Displaying Terminal Settings

To display the current terminal settings, including the screen length and width, type:

controller> show terminal

Terminal Length:         0

Terminal Width:          80

History Buffer Size:     10

Customizing the CLI Prompt

Setting Terminal Screen Length and Width

By default, the terminal length is set to 0 rows, and the width is set to 80 columns. To override this default setting, and set the number of lines or character columns on the current terminal screen for the current session, use the following commands in user EXEC mode:

controller> terminal length screen‐length controller> terminal width characters

To reset the terminal length and width to the default values, use the default command:

controller> default terminal length controller> default terminal width

Setting the terminal length to a non-zero value turns on paging. When the output length exceeds the terminal length, the output is paused and a —More— is displayed:

1. If the space bar is pressed at the —More— prompt, another page of output is displayed.
2. If the ENTER key is pressed at the —More— prompt, a single line of output is displayed.
3. If any other character at the —More— prompt, this signifies the end of output and the command prompt is displayed.

Customizing the CLI Prompt

Default CLI Prompt

By default, the CLI prompt consists of the system name followed by an angle bracket (>) for user EXEC mode or a pound sign (#) for privileged EXEC mode.

Commands to Customize CLI Prompt

To customize the CLI prompt for your system, use one of the following commands in Global Configuration mode:

TABLE 2: Commands to Customize the CLI Prompt

Finding Words in show Command Output

To quickly locate a word in the output of any show command, use the following command: show argument | grep “string”

For this feature to work, only one show command can be the input to the grep and the show command cannot have arguments (for example, the form of the command) such as show ap 54. The “string” is a literal, case-sensitive word to search for (such as AP-54), and must be enclosed in double quotation marks. Only one string search can be performed per command line.

Finding Words in show Command Output

As an example, to search for and display the entry for AP-54 in the output of the show ap command, use the command: controller# show ap | grep “AP‐54”

AP ID AP Name     Serial Number      Op State  Availability   Runtime          

Connectivity AP Model AP Type

54    AP‐54       00:0c:e6:00:3e:a8  Disabled  Offline        3.1.4‐25 None         AP332 Local  

        AP Table(1 entry)

Using Command History

The CLI provides a history of commands that you have entered during the session. This is useful in recalling long and complex commands, and for retyping commands with slightly different parameters. To use the command history feature, you can perform the following tasks:

• Set the command history buffer size
• Recall commands
• Disable the command history feature

Setting the Command History Buffer Size

By default, the CLI records ten command lines in its history buffer. To set the number of command lines that the system will record during the current terminal session, and enable the command history feature, use the terminal history command: controller# terminal history [size n]

The terminal no history size command resets the number of lines saved in the history buffer to the default of ten lines or number specified by size.

To reset the history buffer size to its default (10), type default history: controller# default history

To display the contents of the history buffer, type terminal history

Using Command History

controller# terminal history

    7 interface Dot11Radio 1     8 end

• interface Fast Ethernet controller 1 2
• show interface Dot11Radio 1
• end
• show interfaces FastEthernet controller 1 2
• sh alarm
• sh sec
• sh security

Recalling Commands

To recall commands from the history buffer, use one of the following commands or key combinations: • Ctrl-P or Up Arrow key. This recalls commands in the history buffer, beginning with the most recent command. Repeat the key sequence to recall successively older commands. • Ctrl-N or Down Arrow key. Returns to more recent commands in the history buffer after recalling commands with Ctrl-P or the Up Arrow key.

• !number. Execute the command at the history list number. Use the terminal history or show history commands to list the history buffer, then use this command to re-execute the command listed by its sequence number.
• To list the contents of the history buffer, use the show history command: controller# show history

Disabling the Command History Feature

The terminal history feature is automatically enabled. To disable it during the current terminal session, type no terminal history in either privileged or non-privileged EXEC mode: controller# no terminal history

Getting Help

Entering a question mark (?) at the system prompt displays a list of commands for each command mode. When using context-sensitive help, the space (or lack of a space) before the question mark (?) is significant. To obtain a list of commands that begin with a particular character sequence, enter those characters followed immediately by the question mark (?). Do not include a space. This form of help is called word help, because it completes a word for you.

To list keywords or arguments, enter a question mark (?) in place of a keyword or argument. Include a space before the ?. This form of help is called command syntax help, because it reminds you which keywords or arguments are applicable based on the command, keywords, and arguments you already have entered.

TABLE 1: Examples of Help Commands

Using No and Default Forms of Commands

TABLE 1: Examples of Help Commands

The prompt displayed depends on the configuration mode.

You can abbreviate commands and keywords to the number of characters that allow a unique abbreviation. For example, you can abbreviate the configure terminal command to config t.

Entering the help command will provide a description of the help system. This is available in any command mode.