VM CPU Monitoring Event

Event Type: PH_DEV_MON_VM_CPU_UTIL

Description: Event containing VM CPU metrics Source: All Key Attributes:

Name	Id	Type	Description
Event Type	eventType	string	Event type set to PH_DEV_MON_SYS_PING_STAT
Event Severity	eventSeverity	uint16	Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event Severity Category	eventSeverityCat	string	Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive Time	phRecvTime	Date	Time at which AccelOps generated this event
Reporting IP	reptDevIpAddr	Date	IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP	relayDevIpAddr	Date	IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event Log	rawEventMsg	string	Raw event containing all attributes in comma separated “[Attribute] = value” format.
	vmName
Host name	hostName	string	Host name (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Host IP Address	hostIpAddr	IP	Access IP (as in AccelOps CMDB) of the device whose CPU utilization is being reported
	phyMachName
	phyMachIpAddr
Avg Round Trip Time	processors	uint32	Average Round trip time from the ping tests done during this interval
Max Round Trip Time	vCpus	uint32	Max Round trip time from the ping tests done during this interval
Min Round Trip Time	cpuUtil	uint32	Min Round trip time from the ping tests done during this interval
	cpuRunPct
	cpuMlmtedPct

 

VMware Monitoring Events

AccelOps generates the following events VMware related system monitoring events

VM level events

VM State Monitoring

VM Uptime Monitoring

VM CPU Monitoring

VM Per CPU Monitoring

VM Memory Monitoring

VM Datastore Utilization Monitoring

VM Disk I/O Monitoring

VM Datastore I/O Monitoring

VM Network I/O Monitoring

Disk Growth Trend – Daily

Disk Growth Trend – Weekly

Disk Growth Trend – Monthly

ESX level events

Name	Id	Type	Description
Event Type	eventType	string	Event type set to PH_DEV_MON_SYS_PING_STAT
Event Severity	eventSeverity	uint16	Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event Severity Category	eventSeverityCat	string	Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive Time	phRecvTime	Date	Time at which AccelOps generated this event
Reporting IP	reptDevIpAddr	Date	IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP	relayDevIpAddr	Date	IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event Log	rawEventMsg	string	Raw event containing all attributes in comma separated “[Attribute] = value” format.
VM Name	vmName
Host name	hostName	string	Host name (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Host IP Address	hostIpAddr	IP	Access IP (as in AccelOps CMDB) of the device whose CPU utilization is being reported

ESX State Monitoring

ESX CPU Monitoring

ESX Memory Monitoring

ESX Datastore Utilization Monitoring

ESX Disk I/O Monitoring

ESX Datastore I/O Monitoring

Cluster and resource pool events

VM Cluster CPU Utilization

VM Cluster Memory Utilization

VM Cluster Datastore I/O Utilization

VM Resource pool CPU Utilization

VM Resource pool Memory Utilization

VM State Monitoring

Event Type: PH_DEV_MON_VM_STATE

Description: Event containing VM State Source: All Key Attributes:

Physical Machine Name	phyMachName	string
Physical machine IP	phyMachIpAddr	IP
	vmPowerState	string
	vmPowerStateCode	uint32
	vmConnectionState	string
	vmConnectionStateCode	uint32
	status	string
Poll Interval	pollIntv	uint32	Poll interval in seconds

 

Name	Id	Type	Description
Event Type	eventType	string	Event type set to PH_DEV_MON_SYS_PING_STAT
Event Severity	eventSeverity	uint16	Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event Severity Category	eventSeverityCat	string	Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive Time	phRecvTime	Date	Time at which AccelOps generated this event
Reporting IP	reptDevIpAddr	Date	IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP	relayDevIpAddr	Date	IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event Log	rawEventMsg	string	Raw event containing all attributes in comma separated “[Attribute] = value” format.
	vmName
Host name	hostName	string	Host name (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Host IP Address	hostIpAddr	IP	Access IP (as in AccelOps CMDB) of the device whose CPU utilization is being reported
	phyMachName

 

VM Uptime Monitoring

Event Type: PH_DEV_MON_VM_UPTIME

Description: Event containing VM Uptime Source: All Key Attributes:

	phyMachIpAddr
	sysUpTime
	sysDownTime
Poll Interval	pollIntv	uint32	Polling interval in seconds

Hardware Monitoring Events

AccelOps generates the following events related to hardware monitoring

Overall Hardware Status

Individual Hardware Component Status

Temperature Measurement

Humidity Measurement

Dew point Measurement

Air flow Measurement

Audio Measurement

Ampere Measurement

Dry Contact Measurement

Camera Motion Measurement

Power Supply Measurement

Chassis Component Measurement

Overall Hardware Status Event

This event is generated by AccelOps as a overall hardware status. Sometimes this overall status is provided the device. In other times, AccelOps derives the overall health from that of the individual hardware components.

Event Type: PH_DEV_MON_HW_STAT

Description: Event containing overall hardware status as detected by AccelOps

Cisco IOS (SNMP),Cisco Nx-OS (SNMP), Juniper JunOS (SNMP), Juniper SRX JunOS (SNMP), Alcatel TiMOS (SNMP), Alcatel

AOS (SNMP),Avaya/Nortel ERS (SNMP), Huawei VRP (SNMP), H3C Comware,

EMC Clariion (NavisecCli), NetApp DataONTAP Filer (SNMP), Dell EqualLogic (SNMP)

F5 Big-IPOS (SNMP), Riverbed Steelhead (SNMP), InfoBlox NiOS (SNMP)

Virtual Machines on VMWare ESX (VMSDK), Windows/Linux Servers on Dell hardware with OpenManage installed (SNMP),

Windows/Linux Servers on HP hardware with HP Insight Manager installed (SNMP),

APC NetBotz (SNMP)

Cisco UPS (UCS API)

HP BladeSystem (SNMP)

Key Attributes: Varies depending on the source. The global set of attributes is shown below

Name	Id	Type	Description
Event Type	eventType	string	Event type set to PH_DEV_MON_HW_STAT
Event Severity	eventSeverity	uint16	0 if the event attribute hwStatusCode is 0 (Normal), 5  if hwStatusCode is 1 (Warning) and 10  if hwStatusCode is 2 (Critical)
Event Severity Category	eventSeverityCat	string	Set to Low. In general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive Time	phRecvTime	Date	Time at which AccelOps generated this event
Reporting IP	reptDevIpAddr	Date	IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP	relayDevIpAddr	Date	IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event Log	rawEventMsg	string	Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name	hostName	string	Host name (as in AccelOps CMDB) of the device whose overall hardware health is being reported
Host IP Address	hostIpAddr	IP	Access IP (as in AccelOps CMDB) of the device whose overall hardware health is being reported
Hardware Status	hwStatusCode	uint16	Overall hardware status: 0 for Normal, 1 for Warning and 2 for Critical
Hardware Power Supply Status	hwPowerSupplyStatus	uint16	Overall hardware status: 0 for Normal, 1 for Warning and 2 for Critical
Hardware Battery Status	hwBatteryStatus	uint16	Battery status: 0 for Normal, 1 for Warning and 2 for Critical
Hardware Disk Status	hwDiskStatus	uint16	Disk status: 0 for Normal, 1 for Warning and 2 for Critical
Hardware RAID Status	hwRaidStatus	uint16	Hardware RAID status: 0 for Normal, 1 for Warning and 2 for Critical
Hot Spare Disk Count	hwHotSpareDiskCount	uint16	Number of hot spare disks
Hardware Memory Status	hwMemoryStatus	uint16	Memory status: 0 for Normal, 1 for Warning and 2 for Critical
Hardware Status	hwPowerSupplyStatus	uint16	Power supply status: 0 for Normal, 1 for Warning and 2 for Critical
Failed Power Supply Count	hwFailedPowerSupplyCount	uint16	Number of failed power supplies
Hardware Temp Sensor Status	hwTempSensorStatus	uint16	Temperature sensor status: 0 for Normal, 1 for Warning and 2 for Critical
Hardware Status	hwFanStatus	uint16	Fan status: 0 for Normal, 1 for Warning and 2 for Critical
Failed Fan Count	hwFailedFanCount	uint16	Failed fan count
Hardware Amp Status	hwAmpStatus	uint16	Current (Amp) status: 0 for Normal, 1 for Warning and 2 for Critical
Hardware Voltage Status	hwVoltageStatus	uint16	Voltage status: 0 for Normal, 1 for Warning and 2 for Critical
Storage LCC Status	hwLCCStatus	uint16	Hardware LCC status: 0 for Normal, 1 for Warning and 2 for Critical
Storage Link Status	hwLinkStatus	uint16	Hardware link status: 0 for Normal, 1 for Warning and 2 for Critical
Storage Port Status	hwPortStatus	uint16	Hardware port status: 0 for Normal, 1 for Warning and 2 for Critical
Relative Humidity Status	hwRelHumidStatus	uint16	Relative humidity status: 0 for Normal, 1 for Warning and 2 for Critical
Dew Point Status	hwDewPtStatus	uint16	Dew Point status: 0 for Normal, 1 for Warning and 2 for Critical
Audio Status	hwAudioStatus	uint16	Audio status: 0 for Normal, 1 for Warning and 2 for Critical
Air Flow Status	hwAirFlowStatus	uint16	AIr flow status: 0 for Normal, 1 for Warning and 2 for Critical
Generic Numeric Sensor Status	hwGenNumericSensorStatus	uint16	Generic Numeric sensor status: 0 for Normal, 1 for Warning and 2 for Critical
Dry Contact Status	hwDryContactStatus	uint16	Dry Contact status: 0 for Normal, 1 for Warning and 2 for Critical
Door Switch Status	hwDoorSwitchStatus	uint16	Door switch status: 0 for Normal, 1 for Warning and 2 for Critical
Camera Motion Status	hwCameraMotionStatus	uint16	Camera motion status: 0 for Normal, 1 for Warning and 2 for Critical
Generic State Sensor Status	hwGenStateSensorStatus	uint16	Generic state sensor status: 0 for Normal, 1 for Warning and 2 for Critical

The following table indicates sources of various hardware status events.

Device Type (Method)

Overall

Temp

Power Supply

Fan

Chassis

Memory

Disk

RAID

Battery

Amp

Voltage

LCC

Storage Link

Storage Port

Humidity

Air flow

Dew Point

Audio

Gen Numeric Sensor

Dry Contact

Door Swit

Cisco IOS (SNMP)

x

x

x

x

Cisco Nx-OS (SNMP)

x

x

Juniper JunOS (SNMP),

x

x

x

x

Juniper SRX JunOS (SNMP)

x

x

x

x

Alcatel TiMOS (SNMP)

x

x

x

x

Alcatel AOS (SNMP)

x

x

Huawei VRP (SNMP)

H3C Comware (SNMP)

x

x

EMC Clariion (NavisecCli)

x

x

x

x

x

x

x

c

NetApp DataONTAP Filer (SNMP)

x

x

x

x

x

x

x

x

x

Dell EqualLogic (SNMP)

x

x

x

x

x

x

F5 Big-IPOS (SNMP)

x

x

x

Riverbed Steelhead (SNMP)

x

InfoBlox NiOS (SNMP)

x

x

x

x

x

x

VMs on ESX (VMSDK)

Dell Servers

x

x

x

x

x

x

x

x

x

HP Servers

x

x

x

x

x

x

x

x

x

APC NetBotz

x

x

x

x

x

x

x

x

x

Cisco UCS

HP BladeSystem

x

x

x

Availability Monitoring Events

Availability Monitoring Events

AccelOps generates the following events related to availability monitoring

Ping Stat Monitoring

Synthetic Monitoring Success Synthetic Monitoring Failure

Name	Id	Type	Description
Event Type	eventType	string	Event type set to PH_DEV_MON_SYS_PING_STAT
Event Severity	eventSeverity	uint16	Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event Severity Category	eventSeverityCat	string	Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive Time	phRecvTime	Date	Time at which AccelOps generated this event
Reporting IP	reptDevIpAddr	Date	IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP	relayDevIpAddr	Date	IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event Log	rawEventMsg	string	Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name	hostName	string	Host name (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Host IP Address	hostIpAddr	IP	Access IP (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Avg Round Trip Time	avgDurationMSec	uint32	Average Round trip time from the ping tests done during this interval
Max Round Trip Time	maxDurationMSec	uint32	Max Round trip time from the ping tests done during this interval
Min Round Trip Time	minDurationMSec	uint32	Min Round trip time from the ping tests done during this interval
Packet Loss Pct	pktLossPct	double	Packet loss percentage from the ping tests done during this interval
System Down Time	sysDownTime	uint32	Amount of time during this polling interval that there was 100% ping loss
System Degraded Time	sysDegradedTime	uint32	Amount of time during this polling interval that there was 50%+ ping loss
Poll Interval	pollIntv	uint32	Polling interval in seconds

Synthetic Transaction Monitoring Success

Event Type: PH_DEV_MON_EUM_SUCCESS

Description: Successful Synthetic transaction monitoring test Source: All Key Attributes:

Name	Id	Type	Description
Event Type	eventType	string	Event type set to PH_DEV_MON_SYS_EUM_SUCCESS
Event Severity	eventSeverity	uint16	Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event Severity Category	eventSeverityCat	string	Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive Time	phRecvTime	Date	Time at which AccelOps generated this event
Reporting IP	reptDevIpAddr	Date	IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP	relayDevIpAddr	Date	IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event Log	rawEventMsg	string	Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name	hostName	string	Host name (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Host IP Address	hostIpAddr	IP	Access IP (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Synthetic Transaction Monitor Name	endUserMonitorName	string	Name of the Synthetic Transaction Monitor
Synthetic Transaction Monitor Step	endUserMonitorStep	string	Particular step of the Synthetic Transaction Monitor, in case the transaction monitor involves multiple steps.
Application Protocol	appTransportProto	string	Application protocol such as HTTP
Application Port	appPort	string	Port number such as 443
Application Response Time	appResponseTimeMSec	uint32	Synthetic transaction response time (ms)
Poll Interval	pollIntv	uint32	Polling interval in seconds

Synthetic Transaction Monitoring Failure

Event Type: PH_DEV_MON_EUM_FAIL

Description: Failed Synthetic transaction monitoring test Source: All Key Attributes:

Name	Id	Type	Description
Event Type	eventType	string	Event type set to PH_DEV_MON_SYS_EUM_SUCCESS
Event Severity	eventSeverity	uint16	Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event Severity Category	eventSeverityCat	string	Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive Time	phRecvTime	Date	Time at which AccelOps generated this event
Reporting IP	reptDevIpAddr	Date	IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)

 

Relaying IP	relayDevIpAddr	Date	IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event Log	rawEventMsg	string	Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name	hostName	string	Host name (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Host IP Address	hostIpAddr	IP	Access IP (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Synthetic Transaction Monitor Name	endUserMonitorName	string	Name of the Synthetic Transaction Monitor test
Synthetic Transaction Monitor Step	endUserMonitorStep	string	Particular step of the Synthetic Transaction Monitor, in case the transaction monitor involves multiple steps.
Application Protocol	appTransportProto	string	Application protocol such as HTTP
Application Port	appPort	string	Port number such as 443
Reason for Error	errReason	uint32	Reason for failed Synthetic Transaction Monitor test
Poll Interval	pollIntv	uint32	Polling interval in seconds

 

 

Disk Growth Trend – Monthly

Event Type: PH_DEV_MON_SYS_DISK_TREND_MONTH

Disk Capacity Util	diskUtil	double	Disk utilization for a specific disk name (between 0-100).
Free Disk (MB)	freeDiskMB	uint32	Size of free disk available in MBytes
Total Disk (MB)	totalDiskMB	uint32	Size of total disk in MBytes
Used Disk (MB)	usedDiskMB	uint32	Size of used disk in MBytes
Current Week Disk Growth (MB)	diskGrowthMBWeekly	double	Disk growth (MB) for the current week
Avg Weekly Disk Growth (MB)	avgDiskGrowthMBWeekly	double	Running avg of weekly disk growth (MB) overall previous days
Days To Disk Full	timeToDiskFull	uint32	Number of days until disk is full (from weekly growth statistics)
Poll Interval	pollIntv	uint32	Polling interval in seconds.

Description: Event containing disk usage growth trend – monthly view Source:

Microsoft Windows (SNMP or WMI), Linux (SNMP), Solaris (SNMP), HP-UX (SNMP), IBM AIX (SNMP) NetApp DataONTAP (SNMP)

Key Attributes:

Name	Id	Type	Description
Event Type	eventType	string	Event type set to PH_DEV_MON_SYS_DISK_TREND_DAY
Event Severity	eventSeverity	uint16	Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event Severity Category	eventSeverityCat	string	Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive Time	phRecvTime	Date	Time at which AccelOps generated this event
Reporting IP	reptDevIpAddr	Date	IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP	relayDevIpAddr	Date	IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event Log	rawEventMsg	string	Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name	hostName	string	Host name (as in AccelOps CMDB) of the device whose disk utilization is being reported
Host IP Address	hostIpAddr	IP	Access IP (as in AccelOps CMDB) of the device whose disk utilization is being reported
Disk Name	diskName	string	Disk name
Disk Capacity Util	diskUtil	double	Disk utilization for a specific disk name (between 0-100).
Free Disk (MB)	freeDiskMB	uint32	Size of free disk available in MBytes
Total Disk (MB)	totalDiskMB	uint32	Size of total disk in MBytes
Used Disk (MB)	usedDiskMB	uint32	Size of used disk in MBytes
Current Monthly Disk Growth (MB)	diskGrowthMBMonthly	double	Disk growth (MB) for the current month
Avg Monthly Disk Growth (MB)	avgDiskGrowthMBMonthly	double	Running avg of monthly disk growth (MB) overall previous months
Days To Disk Full	timeToDiskFull	uint32	Number of days until disk is full (from monthly growth statistics)
Poll Interval	pollIntv	uint32	Polling interval in seconds.

 

Disk Growth Trend – Weekly

Event Type: PH_DEV_MON_SYS_DISK_TREND_WEEK

Description: Event containing disk usage growth trend – weekly view Source:

Microsoft Windows (SNMP or WMI), Linux (SNMP), Solaris (SNMP), HP-UX (SNMP), IBM AIX (SNMP) NetApp DataONTAP (SNMP)

Key Attributes:

Name	Id	Type	Description
Event Type	eventType	string	Event type set to PH_DEV_MON_SYS_DISK_TREND_DAY
Event Severity	eventSeverity	uint16	Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event Severity Category	eventSeverityCat	string	Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive Time	phRecvTime	Date	Time at which AccelOps generated this event
Reporting IP	reptDevIpAddr	Date	IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP	relayDevIpAddr	Date	IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event Log	rawEventMsg	string	Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name	hostName	string	Host name (as in AccelOps CMDB) of the device whose disk utilization is being reported
Host IP Address	hostIpAddr	IP	Access IP (as in AccelOps CMDB) of the device whose disk utilization is being reported
Disk Name	diskName	string	Disk name

Disk Growth Trend – Daily

Event Type: PH_DEV_MON_SYS_DISK_TREND_DAY

Description: Event containing disk usage growth trend – daily view Source:

Microsoft Windows (SNMP or WMI), Linux (SNMP), Solaris (SNMP), HP-UX (SNMP), IBM AIX (SNMP) NetApp DataONTAP (SNMP)

Key Attributes:

Event Severity Category	eventSeverityCat	string	Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive Time	phRecvTime	Date	Time at which AccelOps generated this event
Reporting IP	reptDevIpAddr	Date	IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP	relayDevIpAddr	Date	IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event Log	rawEventMsg	string	Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name	hostName	string	Host name (as in AccelOps CMDB) of the device whose disk utilization is being reported
Host IP Address	hostIpAddr	IP	Access IP (as in AccelOps CMDB) of the device whose disk utilization is being reported
Disk Name	diskName	string	Disk name
Disk Capacity Util	diskUtil	double	Disk utilization for a specific disk name (between 0-100).
Free Disk (MB)	freeDiskMB	uint32	Size of free disk available in MBytes
Total Disk (MB)	totalDiskMB	uint32	Size of total disk in MBytes
Used Disk (MB)	usedDiskMB	uint32	Size of used disk in MBytes
Current Daily Disk Growth (MB)	diskGrowthMBDaily	double	Disk growth (MB) for the current day
Avg Daily Disk Growth (MB)	avgDiskGrowthMBDaily	double	Running avg of daily disk growth (MB) overall previous days
Days To Disk Full	timeToDiskFull	uint32	Number of days until disk is full (from daily growth statistics)
Poll Interval	pollIntv	uint32	Polling interval in seconds.

Network Interface Monitoring

Event Type: PH_DEV_MON_NET_INTF_UTIL

Description: Event containing network interface utilization metrics Source – almost all devices via SNMP:

Cisco IOS (SNMP), , Cisco NX-OS, Extreme ExtremeOS, Foundry Ironware, HP ProCurve

Cisco ASA/PIX/FWSM (SNMP), Checkpoint FW-1, Juniper SSG/ISG, Palo Alto Firewall, Sonicwall SonicOS, Fortinet FortiOS Cisco IPS (SNMP), Tippingpoint IPS (SNMP)

NetApp DataONTAP (SNMP)

Microsoft Windows (SNMP or WMI), Linux (SNMP), Solaris (SNMP), HP-UX (SNMP), IBM AIX (SNMP)

Sample event

[PH_DEV_MON_NET_INTF_UTIL]:[eventSeverity]=PHL_INFO,[fileName]=phIn tfFilter.cpp,[lineNumber]=275,[intfName]=GigabitEthernet4/41,[intfA lias]=Connection to Internet,[hostName]=SJ-Main-Cat6500,[hostIpAddr]=192.168.0.1,[pollI ntv]=177,[recvBytes]=0,[recvBitsPerSec]=0.000000,[inIntfUtil]=0.000 000,[sentBytes]=0,[sentBitsPerSec]=0.000000,[outIntfUtil]=0.000000,

[recvPkts]=0,[sentPkts]=0,[inIntfPktErr]=0,[inIntfPktErrPct]=0.0000 00,[outIntfPktErr]=0,[outIntfPktErrPct]=0.000000,[inIntfPktDiscarde d]=0,[inIntfPktDiscardedPct]=0.000000,[outIntfPktDiscarded]=0,[outI ntfPktDiscardedPct]=0.000000,[outQLen]=0,[intfSpeed64]=1000000000,[ intfAdminStatus]=up,[intfOperStatus]=down,[daysSinceLastUse]=487,[p hLogDetail]=

Key Attributes:

Name	Id	Type	Description
Event Type	eventType	string	Event type set to PH_DEV_MON_NET_INTF_UTIL
Event Severity	eventSeverity	uint16	Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)
Event Severity Category	eventSeverityCat	string	Set to Low. IN general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive Time	phRecvTime	Date	Time at which AccelOps generated this event
Reporting IP	reptDevIpAddr	Date	IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP	relayDevIpAddr	Date	IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.

 

Raw Event Log	rawEventMsg	string	Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name	hostName	string	Host name (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Host IP Address	hostIpAddr	IP	Access IP (as in AccelOps CMDB) of the device whose CPU utilization is being reported
Host Intf Name	intfName	string	The name of the network interface for which this statistics applies
In Intf Util	inIntfUtil	double	Inbound (or received) network utilization (between 0-100).
Received Bytes	recvBytes	uint32	Inbound (or received) bytes during this interval
Received Byte Rate (/sec)	recvBytesPerSec	double	Inbound (or received) byte rate during this interval
Received Packets	recvPkts	uint32	Inbound (or received) packets received during this interval
In Packet Error	inIntfPktErr	uint32	Inbound (or received) packet errors
In Packet Error Pct	inIntfPktErrPct	double	Inbound (or received) packet error as a percentage of total packets
In Packet Discards	inIntfPktDiscarded	uint32	Inbound (or received) packet discarded
In Packet Discard Pct	inIntfPktDiscardedPct	double	Inbound (or received) packet discarded as a percentage of total packets
Out Intf Util	outIntfUtil	double	Outbound (or sent) network utilization (between 0-100).
Sent Bytes	sentBytes	uint32	Outbound (or sent) bytes during this interval
Sent Byte Rate (/sec)	sentBytesPerSec	double	Inbound (or received) byte rate during this interval
Sent Packets	sentPkts	uint32	Outbound (or sent) packets sent during this interval
Out Packet Error	outIntfPktErr	double	Outbound (or sent) packet errors
Out Packet Error Pct	outIntfPktErrPct	double	Outbound (or sent) packet error as a percentage of total packets
Out Packet Discards	outIntfPktDiscarded	uint32	Outbound (or sent) packet discarded
Out Packet Discard Pct	outIntfPktDiscardedPct	double	Outbound (or sent) packet discarded as a percentage of total packets
Out Queue Length	outQLen	uint32	Length of output queue
Poll Interval	pollIntv	uint32	Polling interval in seconds

 

 

Name	Id	Type	Description
Event Type	eventType	string	Event type set to PH_DEV_MON_SYS_DISK_TREND_DAY
Event Severity	eventSeverity	uint16	Set to 1. In general, a number between 0 (lowest severity) and 10 (highest severity)