Local-based filters

To configure the local-based AntiSpam filter in the CLI: config emailfilter bwl

FGT-300D-SPAM (bwl) # edit 1 new entry ‘1’ added

FGT-300D-SPAM (1) # set name myBWL

FGT-300D-SPAM (1) # config entries config entries

edit 1

set status enable set type ip set action spam set addr-type ipv4 set ip4-subnet 10.1.100.0 255.255.255.0

next

end

config emailfilter profile edit “myLocalEmailFilter” set spam-filtering enable set options spambwl spamhelodns spamraddrdns config smtp

set action tag

end set spam-bwl-table 1

next

end config firewall policy

edit 1 …..

set inspection-mode proxy set emailfilter-profile “myLocalEmailFilter”

next end

To configure the local-based AntiSpam filter in the GUI:

1. Go to Security Profiles > Email Filter.
2. Click Create or select an existing profile and click Edit.
3. In the Firewall policy, create or edit a rule.
4. Set the inspection-mode to Proxy-based.
5. Enable the Email Filter option and select the profile previously created.
6. Set SSL Inspection to a profile that has deep SSL inspection enabled.
   • Deep inspection is required if you intend to filter SMTP, POP3, IMAP, or any SSL/TLS encapsulated protocol.
   • Below is an example of a profile with deep SSL inspection enabled.

To configure bannedwords in the CLI:

config emailfilter bword edit 1 set name “banned” config entries

edit 1 set pattern “undesired_word”

next

end

next

end

config emailfilter profile edit “myBannedWordsProfile” config file-filter set status disable

end set spam-filtering enable set options bannedword set spam-bword-table 1

next

end