CLI changes for FortiLink mode (447349, 473773)
There are changes to the execute switch-controller get-physical-connection, execute switch-controller get-conn-status, and diagnose switch-controller dump networkupgrade status CLI commands.
- The execute switch-controller get-physical-connection CLI command has new parameters:
Use the execute switch-controller get-physical-connection standard command to get the FortiSwitch stack connectivity graph in the standard output format.
Use the execute switch-controller get-physical-connection dot command to get the
FortiSwitch stack connectivity graph in a .dot (Graphviz) output format.
- The execute switch-controller get-conn-status CLI command output now includes virtual
FortiSwitch units. Virtual FortiSwitch units are indicated by an asterisk (*) after the switch identifier. For example:
execute switch-controller get-conn-status
| STACK-NAME: FortiSwitch-Stack-port2 | |||||
| SWITCH-ID VERSION | STATUS | ADDRESS | JOIN-TIME | NAME | |
| S108DV2EJZDAC42F v3.6.0 | Authorized/Up | 169.254.2.4 | Thu Feb | 8 17:07:35 2018 | – |
| S108DV4FQON40Q07 v3.6.0 | Authorized/Up | 169.254.2.5 | Thu Feb | 8 17:08:37 2018 | – |
| S108DVBWVLH4QGEB v3.6.0 | Authorized/Up | 169.254.2.6 | Thu Feb | 8 17:09:13 2018 | – |
| S108DVCY19SA0CD8 v3.6.0 | Authorized/Up | 169.254.2.2 | Thu Feb | 8 17:04:41 2018 | – |
| S108DVD98KMQGC44* v3.6.0 | Authorized/Up | 169.254.2.7 | Thu Feb | 8 17:10:50 2018 | – |
| S108DVGGBJLQQO48* v3.6.0 | Authorized/Up | 169.254.2.3 | Thu Feb | 8 17:06:57 2018 | – |
| S108DVKM5T2QEA92 v3.6.0 | Authorized/Up | 169.254.2.8 | Thu Feb | 8 17:11:00 2018 | – |
| S108DVZX3VTAOO45 v3.6.0 | Authorized/Up | 169.254.2.9 | Thu Feb | 8 17:11:00 2018 | – |
| Managed-Switches: 8 | UP: 8 | DOWN: 0 | |||
- The diagnose switch-controller dump network-upgrade status CLI command output now
includes the location of the image that is loaded when the FortiSwitch unit is restarted. If the Next boot column is blank, the FortiSwitch unit uses the same location each it is restarted. The status column shows the percentage downloaded, the percentage erased in flash memory, and the percentage written to flash memory.
For example:
diagnose switch-controller dump network-upgrade status
Running Status Next boot
__________________ ________________________________________ _________ ___________________________ VDOM : root
S108DVCY19SA0CD8 S108DV-v3.6.0-build4277,171207 (Interim) (0/0/0) S108DV-v3.7.0build4277,171207 (Interim)
S108DV2EJZDAC42F S108DV-v3.6.0-build4277,171207 (Interim) (0/0/0)