FortiSIEM Hardware Monitoring Events

Temperature Measurement Event

This event is generated when the device provides actual per component or sensor temperature readings.

Event Type: PH_DEV_MON_HW_TEMP

Description: Event capturing temperature readings for network devices and environmental monitors

Cisco IOS (SNMP),Cisco Nx-OS (SNMP), Juniper JunOS (SNMP), Juniper SRX JunOS (SNMP), Alcatel AOS

(SNMP),Avaya/Nortel ERS (SNMP), H3C Comware,

Dell EqualLogic (SNMP)

F5 Big-IPOS (SNMP), APC NetBotz (SNMP)

Cisco UCS (UCS API)

Key Attributes: Varies depending on the source – see portions in bold below.

Name Id Type Description
Event Type eventType string Event type set to PH_DEV_MON_HW_TEMP
Event Severity eventSeverity uint16 1 set to INFO
Event Severity

Category

eventSeverityCat string Set to Low. In general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive Time phRecvTime Date Time at which AccelOps generated this event
Reporting IP reptDevIpAddr Date IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP relayDevIpAddr Date IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event Log rawEventMsg string Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name hostName string Host name (as in AccelOps CMDB) of the device whose overall hardware health is being reported
Host IP Address hostIpAddr IP Access IP (as in AccelOps CMDB) of the device whose overall hardware health is being reported
Hardware

Component Name

hwComponentName String Name of the temperature sensor
Temperature

(Celsius)

envTempDegC uint32 Temperature in Celsius
Temperature

(Fahrenheit)

envTempDegF uint32 Temperature in Fahrenheit
High Temperature

Threshold (Celsius)

envTempHighThreshDegC uint32 High temperature threshold in Celsius (only for Cisco IOS, H3C Comware, Alcatel AOS,APC NetBotz)
Temp Offset High

(Celsius)

envTempOffHighDegC uint32 Offset from high threshold in Celsius, set to  envTempHighThreshDegC – envTempDegC (only fo r Cisco IOS, H3C Comware, Alcatel AOS,APC NetBotz)
High Temperature

Threshold

(Fahrenheit)

envTempHighThreshDegF uint32 High temperature threshold in Fahrenheit (only for Cisco IOS, H3C Comware, Alcatel AOS,APC NetBotz)
Temp Offset High

(Fahrenheit)

envTempOffHighDegF uint32 Offset from high threshold in Fahrenheit, set to  envTempHighThreshDegF – envTempDegF (only for Cisco IOS, H3C Comware, Alcatel AOS,APC NetBotz)
Env Sensor Id envSensorId string Temperature sensor id (only for APC NetBotz)
Env Sensor Label envSensorLabel string Temperature sensor label (only for APC NetBotz)
 Env Sensor

Enclosure Id

envSensorEnclosureId string Temperature sensor enclosure id (only for APC NetBotz)

 

Humidity Measurement Event

This event is generated when the device provides actual per component or sensor temperature readings.

Event Type: PH_DEV_MON_HW_HUMIDITY

Description: Event specifying relative humidity settings

Source: APC NetBotz (SNMP)

Key Attributes: Varies depending on the source – see portions in bold below.

Name Id Type Description
Event Type eventType string Event type set to PH_DEV_MON_HW_HUMIDITY
Event

Severity

eventSeverity uint16 1 set to INFO
Event

Severity

Category

eventSeverityCat string Set to Low. In general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event

Receive

Time

phRecvTime Date Time at which AccelOps generated this event
Reporting IP reptDevIpAddr Date IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP relayDevIpAddr Date IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event

Log

rawEventMsg string Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name hostName string Host name (as in AccelOps CMDB) of the device whose overall hardware health is being reported
Host IP

Address

hostIpAddr IP Access IP (as in AccelOps CMDB) of the device whose overall hardware health is being reported
Env Sensor

Id

envSensorId string Humidity sensor id
Env Sensor

Label

envSensorLabel string Humidity sensor label
Env Sensor

Enclosure Id

envSensorEnclosureId string Humidity sensor enclosure id
Relative

Humidity

envHumidityRel uint32 Relative Humidity

 

Airflow Measurement Event

This event is generated when the device provides actual per component or sensor temperature readings.

Event Type: PH_DEV_MON_HW_AIRFLOW

Description: Event specifying relative humidity readings

Source: APC NetBotz (SNMP)

Key Attributes: Varies depending on the source – see portions in bold below.

Name Id Type Description
Event Type eventType string Event type set to PH_DEV_MON_HW_HUMIDITY
Event Severity eventSeverity uint16 1 set to INFO
Event Severity

Category

eventSeverityCat string Set to Low. In general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event Receive

Time

phRecvTime Date Time at which AccelOps generated this event
Reporting IP reptDevIpAddr Date IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP relayDevIpAddr Date IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event

Log

rawEventMsg string Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name hostName string Host name (as in AccelOps CMDB) of the device whose overall hardware health is being reported
Host IP

Address

hostIpAddr IP Access IP (as in AccelOps CMDB) of the device whose overall hardware health is being reported
Env Sensor Id envSensorId string Humidity sensor id
Env Sensor

Label

envSensorLabel string Humidity sensor label
Env Sensor

Enclosure Id

envSensorEnclosureId string Humidity sensor enclosure id
Air Flow

(0.1meter/min)

envAirFlow uint32 Air flow in 0.1 meters/minute

 

Dew point Measurement Event

This event is generated when the device provides actual per component or sensor temperature readings.

Event Type: PH_DEV_MON_HW_DEWPT

Description: Event specifying relative dew point temperature readings

Source: APC NetBotz (SNMP)

Key Attributes: Varies depending on the source – see portions in bold below.

Name Id Type Description
Event Type eventType string Event type set to PH_DEV_MON_HW_DEWPT
Event

Severity

eventSeverity uint16 1 set to INFO
Event

Severity

Category

eventSeverityCat string Set to Low. In general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event

Receive Time

phRecvTime Date Time at which AccelOps generated this event
Reporting IP reptDevIpAddr Date IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP relayDevIpAddr Date IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event

Log

rawEventMsg string Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name hostName string Host name (as in AccelOps CMDB) of the device whose overall hardware health is being reported
Host IP

Address

hostIpAddr IP Access IP (as in AccelOps CMDB) of the device whose overall hardware health is being reported
Env Sensor Id envSensorId string Humidity sensor id
Env Sensor

Label

envSensorLabel string Humidity sensor label
Env Sensor

Enclosure Id

envSensorEnclosureId string Humidity sensor enclosure id
Temperature

(Celsius)

envTempDegC uint32 Dew point temperature in Celsius
Temperature

(Fahrenheit)

envTempDegF uint32 Dew point temperature in Fahrenheit

Audio Level Measurement Event

This event is generated when the device provides actual per component or sensor temperature readings.

Event Type: PH_DEV_MON_HW_AUDIO

Description: Event specifying audio level readings

Source: APC NetBotz (SNMP)

Key Attributes: Varies depending on the source – see portions in bold below.

Name Id Type Description
Event Type eventType string Event type set to PH_DEV_MON_HW_AUDIO
Event

Severity

eventSeverity uint16 1 set to INFO
Event

Severity

Category

eventSeverityCat string Set to Low. In general, takes the values Low, Medium and High. Event Severities 0-4 are mapped to Low, 5-8 are mapped to Medium and 9-10 are mapped to High
Event

Receive

Time

phRecvTime Date Time at which AccelOps generated this event
Reporting IP reptDevIpAddr Date IP address of device reporting this event. In this case set to the device reporting the utilization (same as Host name attribute)
Relaying IP relayDevIpAddr Date IP address of device relaying this event from the source to AccelOps. In general it could be a syslog-ng IP address but in this, since AccelOps talks to the device directly, Relaying IP is set to AccelOps IP Address.
Raw Event

Log

rawEventMsg string Raw event containing all attributes in comma separated “[Attribute] = value” format.
Host name hostName string Host name (as in AccelOps CMDB) of the device whose overall hardware health is being reported
Host IP

Address

hostIpAddr IP Access IP (as in AccelOps CMDB) of the device whose overall hardware health is being reported
Env Sensor

Id

envSensorId string Humidity sensor id
Env Sensor

Label

envSensorLabel string Humidity sensor label
Env Sensor

Enclosure Id

envSensorEnclosureId string Humidity sensor enclosure
Audio Sensor

Level

envAudioLevel uint32 Audio Sensor Level

 

This entry was posted in Administration Guides, FortiSIEM on by .

About Mike

Michael Pruett, CISSP has a wide range of cyber-security and network engineering expertise. The plethora of vendors that resell hardware but have zero engineering knowledge resulting in the wrong hardware or configuration being deployed is a major pet peeve of Michael's. This site was started in an effort to spread information while providing the option of quality consulting services at a much lower price than Fortinet Professional Services. Owns PacketLlama.Com (Fortinet Hardware Sales) and Office Of The CISO, LLC (Cybersecurity consulting firm).

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.